Finite Element Simulation of Deformation in Machining Large Thin-walled Aluminum Alloy Ring
来源期刊：Journal Of Wuhan University Of Technology Materials Science Edition2009年第S1期
论文作者：王扬 吴雪峰
文章页码：95 - 99
摘 要：Based on the finite element method,the model was established to predict the deformation of large thin-walled ring during machining.After the simulation of heat treatment and 3D cutting process,the factors of initial residual stress,clamping operation,cutting loads and thermal stresses were investigated to evaluate the machining deformation.The results showed that the main factor which influenced machining deformation was initial residual stress produced in quenching process.Improving the clamping method could decrease the machining deformation caused by the release of residual stresses.In the process of finish machining,the cutting force and cutting temperature were low which caused little effect on machining deformation.
王扬，吴雪峰
School of Mechatronics Engineering,Harbin Institute of Technology
摘 要：Based on the finite element method,the model was established to predict the deformation of large thin-walled ring during machining.After the simulation of heat treatment and 3D cutting process,the factors of initial residual stress,clamping operation,cutting loads and thermal stresses were investigated to evaluate the machining deformation.The results showed that the main factor which influenced machining deformation was initial residual stress produced in quenching process.Improving the clamping method could decrease the machining deformation caused by the release of residual stresses.In the process of finish machining,the cutting force and cutting temperature were low which caused little effect on machining deformation.
关键词：
