共搜索到1797条信息，每页显示10条信息，共180页。用时：0小时0分1秒73毫秒
induction array data[J]. Surveys in Geophysics, 2002, 23(2/3): 207-249. [33] SMIRNOV M Y, EGBERT G D. Robust principal component analysis of electromagnetic arrays with missing data[J]. Geophysical Journal......
Experimental Two alloys with compositions of Al-7Si- 0.3Mg and Al-7Si-0.3Mg-0.2Er (wt.%) were cast using ZG-0.025 vacuum induction melting furnace and the detailed compositions are presented in Table 1......
In the present investigation, the alloy was manufactured by in a 25 kg vacuum induction furnace and cast into tensile samples. The nominal chemical composition of the as-cast alloy 625 (in mass fraction......
and diameter of 100 mm were prepared by vacuum medium-frequency induction melting with a melting temperature of 1250 °C and pouring temperature of 1200 °C. The composition of the alloy......
shows no obvious exothermic peak in this temperature range. This implies that the oxidation reaction is in an induction phase and controlled by chemical reaction in this range. At 500-525 °C......
, commercially pure Mg, Li, Al and Zn were used to prepare Mg-8Li-xAl-yZn alloys (LAZ alloys). These raw materials were melted in a vacuum induction furnace under the protection of argon at 3×104 Pa. Mechanical......
of the alloy in 3.5 wt.% NaCl soulution was discussed. 2 Experimental 2.1 Alloy preparation The alloy ingot was prepared by medium- frequency induction melting and iron mold casting (180 mm × 85......
TiB2 powders. Density of Al2024 alloy was 2.78 g/cm3 and that of TiB2 particles was 4.52 g/cm3. Composites were fabricated using an induction furnace equipped with a mechanical stirrer by means......
is given in Table 1. The alloy was produced by melting high purity Al (99.9 wt.%), Al-20Fe, Al-30Si, and Al-15V master alloys in an induction furnace (380 V, 37 A, and 10 kHz) under the protection......
of the wet clutch is applied by Fn, which is provided by the oil pressure P from the solenoid valve during engagement and disengagement. 4 Modelling and experimental validation 4.1 Induction of power train......
