共搜索到16442条信息，每页显示10条信息，共1645页。用时：0小时0分1秒150毫秒
coating was deposited on TC4 titanium alloy using arc ion plating,and the stability of NiCrAlY coating/TC4 substrate system under pure thermal exposure was analyzed in a wide temperature range.During...Stability of NiCrAlY coating/titanium alloy system under pure thermal exposureXiao-Min Peng1,2,An-Ru Wu2,Li-Jun Dong2,You-Rui Tao2,Wei-Guo Gao2,Xiang-Lin Zhou11. State Key Laboratory of Advanced......
J. Cent. South Univ. (2020) 27: 1645-1653 DOI: https://doi.org/10.1007/s11771-020-4396-9 Evolution of surface roughness of a cast Al-Si-Cu piston alloy during thermal exposure BAO Tong(保彤)1, LI... for 2 h at temperatures ranging from 400 to 550°C. The evolution of surface roughness and microstructure of the alloy during thermal exposure was studied by combination methods of roughness profiles......
Thermal Stability of Surface Layer Microstructures of Commercially Pure Titanium Treated by High Energy Shot Peening ZHANG Yu-juan1,REN Rui-ming1,CHEN Chun-huan1 (1.Dalian Jiaotong University.... The commercial pure Ti thermal stability of nanocrystalline and deformed microstructures induced by high-energy-shot-peening (HESP) technique was investigated. The nanostructured surface and deformed sub......
TEM study on microstructures and properties of 7050 aluminum alloy during thermal exposure SHEN Kai(沈 凯)1 , CHEN Jin-ling(陈金灵)1, YIN Zhi-min(尹志民)2 1. School of Materials Science and Technology...; Abstract: The microstructures of 7050 aluminum alloy under different thermal exposure conditions were investigated by means of transmission electron microscopy (TEM), high resolution......
热暴露过程行为示意图 Fig. 5 Schematic diagrams of behaviors of Ta-W coating/titanium alloy system during pure thermal exposure 2.5 Ta-W涂层/钛合金体系纯热暴露行为 综上分析,Ta-W涂层/钛合金体系纯热暴露过程中的行为可用图5示意.不同参数热暴露处理过程中...[J]. Acta Metallurgica et Materialia, 1991, 39(11): 2745-2758. Stability of Ta-W coating/titanium alloy under pure thermal exposure PENG Xiao-min1, DONG Li-jun1, SUN Xiao-gang1, WU An-ru1, XIA......
-solid thixoformed Al-Si-Cu-Mn-Fe alloys after thermal exposure at 300 °C were discussed. The results demonstrate that the elevated temperature tensile properties of semi-solid thixoformed alloys were significantly higher than those of gravity die cast and squeeze cast alloys, especially after thermal exposure for 100 h. The ultimate tensile strength (UTS) of semi-solid thixoformed alloys......
Influence of Thermal Exposure on Mechanical Properties of C/Al Composite郭树启,隋全武,郭文旭,唐凤军摘 要:<正> In this paper were studied the microstructureand...-ray analyses indicate that there isAl4C3 phase in the composites and its amount inthe composites increases when the composites areexposed.In the case of exposure the strength of thecomposites......
as a function of as-cast, heat treatment and thermal exposure. The microstructure and composition of the alloy were investigated by optical microscopy, scanning electron microanalysis (SEM), electron probe... alloy at 980 °C. Key words: single crystal superalloy; DD5 alloy; microstructural evolution; heat treatment; thermal exposure 1 Introduction Nickel-based single crystal (SC) superalloys are critical......
......
Experimental and numerical investigation on pure aluminum by ECAP ZHANG Jing(张 静)1, ZHANG Ke-shi(张克实)1, WU Hwai-Chung2, YU Mei-hua(于梅花)1 1. College of Civil and Architectural... ____________________________________________________________________ Abstract: The equal channel angular pressing(ECAP) experiments were carried out with industrial pure aluminum and an in-house mould......
