Cu-Zn-Al合金中马氏体和贝氏体浮突的原子力显微镜研究

来源期刊：中国有色金属学报1996年第2期

论文作者：杨志刚 方鸿生 王家军 李春明 薄祥正 杨业元 郑燕康

文章页码：63 - 69

关键词：表面浮突 马氏体 贝氏体 原子力显微镜

Key words：surface relief ； martensite ； bainite ； AFM

摘    要：首次采用原子力显微镜(AFM)对Cu-Zu-Al合金中的马氏体浮突和贝氏体浮突进行了定量观测。在此基础上，将AFM的测量结果与马氏体相变表象理论(PTMC)进行了对比，发现马氏体浮突角与PTMC理论相符合，而贝氏体浮突角与PTMC理论不符合，说明贝氏体相变机制与马氏体不同，不可能是切变机制；同时发现贝氏体浮突是一组贝氏体亚单元所造成的浮突组成的浮突群。

Abstract: Surface reliefs accompanying martensite and bainite transformation in Cu-Zn-Al alloy have been investigated with atomic force microscopy (AFM) quantitatively. The phenomenal theory of martensite crystallography (PTMC) was applied to examine the surface relief angle obtained by AFM and agreeable results of martensite are available, however, the results of bainite are different from PTMC, indicating a non-shear mechanism of bainite. Also, the inner structure of surface relief with martensite and bainite were investigated.