复合添加Zr、Cr和Pr对Al-Zn-Mg-Cu合金组织和性能的影响
来源期刊:中国有色金属学报2010年第2期
论文作者:陈康华 方华婵 陈祥
文章页码:195 - 201
关键词:Al-Zn-Mg-Cu合金;微观组织;Pr;力学性能;腐蚀性能;
Key words:Al-Zn-Mg-Cu alloys; microstructure; praseodymium; mechanical properties; corrosion properties
摘 要:采用铸锭冶金法制备Al-Zn-Mg-Cu-Zr、Al-Zn-Mg-Cu-Cr-Pr和Al-Zn-Mg-Cu-Zr-Cr-Pr 3种合金,通过金相显微、扫描电镜和透射电镜观察以及拉伸性能、极化曲线、应力腐蚀和剥落性能的测试,研究复合添加Zr、Cr和Pr对Al-Zn-Mg-Cu合金组织和性能的影响。结果表明:复合添加Zr、Cr和Pr可有效抑制Al-Zn-Mg-Cu合金回复过程中亚晶的合并和长大,显著抑制再结晶,提高合金抗应力腐蚀和抗剥落腐蚀的性能;与单独添加Zr的合金相比,复合添加Zr、Cr和Pr的合金断裂韧性KⅠC从23.3 MPa·m1/2提高到29.3 MPa·m1/2,合金应力腐蚀开裂界限应力强度因子KⅠSCC由10.9 MPa·m1/2提高到24.5 MPa·m1/2,合金的抗拉强度、屈服强度及伸长率都略有提高。
Abstract: Three kinds of alloys Al-Zr-Mg-Cu-Zr, Al-Zn-Mg-Cu-Cr-Pr and Al-Zn-Mg-Cu-Zr-Cr-Pr were prepared by cast metallurgy. The effects of Zr, Cr and Pr additions on the microstructure and properties of Al-Zn-Mg-Cu alloys were investigated by optical microscopy, scanning electron microscopy, transmission electron microscopy, tensile test, polarization curve measurement, stress corrosion and exfoliation corrosion test. The results show that the combined additions of Zr, Cr and Pr to the Al-Zn-Mg-Cu alloys effectively retard the mergence and growth of the sub-grain during the recovery process, significantly inhibits the recrystallization of Al matrix, thus enhances the resistance to stress corrosion and exfoliation corrosion. Compared with the Al-Zn-Mg-Cu alloy added with Zr, the complex additions of Zr, Cr and Pr into the Al-Zn-Mg-Cu alloy remarkably increase the fracture toughness (KⅠC) from 23.3 MPa·m1/2 to 29.3 MPa·m1/2, and enhance the resistance to stress corrosion cracking (KⅠSCC) from 10.9 MPa·m1/2 to 24.5 MPa·m1/2, yield strength and elongation of the alloys all increase a little.
基金信息:国家重点基础研究发展计划资助项目
国家自然科学基金委员会创新研究群体科学基金资助项目
国家自然科学基金资助项目