共搜索到222814条信息,每页显示10条信息,共22282页。用时:0小时0分0秒453毫秒
Article ID: 1003-6326(2005)06-1253-05 Superplasticity and diffusion bonding of magnesium alloy ZK60 YU Yan-dong(于彦东)1, 2, JIANG Hai-yan(蒋海燕)2, LI Qiang(李 强)2, ZAI Chun-quan(翟春泉)2.... Advanced structural component by SPF/DB processing [J]. Ti Sci and Techn, 1984(2): 1221-1228. [6]Zuruzi A S, Li H, Dong G. Diffusion bonding of aluminium alloy 6061 in air using an interface treatment......
welding. The preferred welding process of titanium alloy is frequently gas tungsten arc(GTA) welding due to its comparatively easier applicability and better economy. In the case of single pass GTA... are provided to illustrate the proposed approach. Key words: pulsed current; gas tungsten arc welding; corrosion; titanium alloy 1 Introduction Due to the excellent combination of properties......
Microstructures and interfacial quality of diffusion bonded TC21 titanium alloy joints LIU Hui-jie, FENG Xiu-li State Key Laboratory of Advanced Welding Production Technology, Harbin Institute of Technology, Harbin 150001, China Received 4 January 2010; accepted 12 April 2010 Abstract: Diffusion bonding of TC21 titanium alloy was carried out at temperature ranging from 780 °C to 980 °C......
......
Trans. Nonferrous Met. Soc. China 25(2015) 80-87 Bonding interface characteristic and shear strength of diffusion bonded Ti-17 titanium alloy Hong LI, Chao ZHANG, Hong-bin LIU, Miao-quan LI School... and shear strength of diffusion bonded Ti-17 titanium alloy at different bonding time were investigated. The results show that the average size of voids decreases while the amount of voids decreases after......
Tungsten Inert Gas Welding–Brazing of AZ31B Magnesium Alloy to TC4 Titanium AlloyChuan Xu,Guangmin Sheng,Hui Wang,Ke Feng,Xinjian YuanCollege of Materials Science and Engineering, Chongqing University摘 要:Tungsten inert gas(TIG) welding-brazing technology using Mg-based filler was developed to join AZ31 B Mg alloy to TC4 Ti alloy in a lap......
Si diffusion behavior during laser welding-brazing of Al alloy and Ti alloy with Al-12Si filler wire CHEN Shu-hai(陈树海), LI Li-qun(李俐群), CHEN Yan-bin(陈彦宾), LIU De-jian(刘德健) State Key...; Abstract: In laser welding-brazing of Al alloy (5A06) and Ti alloy......
文章编号:1004-0609(2009)07-1300-05 Tb掺杂对CoNbZr纳米薄膜软磁性和微波磁性的影响 邓联文1, 2,谢海鹏1,陈鸿飞1,舒 畅1, 2,周克省1,杨兵初1 (1. 中南大学 物理科学与技术学院,长沙 410083; 2. 中南大学 粉末冶金国家重点实验室,长沙 410083) 摘 要:采用磁控溅射工艺制备CoNbZrTb纳米薄膜,研究了掺杂稀土元素Tb对薄膜软磁性能,微波磁导率及其频谱特性的影响.结果表明:少量Tb 掺杂(<2%,摩尔分数)对该类薄膜的微结构和软磁性能影响较小,薄膜仍可保持非晶态结构和良好的软磁性能,但Tb掺杂可以显著增强薄膜磁谱的弛豫性,从而影响其微波磁导率和磁损耗;随Tb 掺杂量的增加,薄膜的磁各向异性场和共振频率得以有效提高;薄膜样品在2 GHz处复磁导率的虚部均大于200.掺杂少量Tb的......
words: diffusion bonding; magnesium alloy; copper alloy; shear strength; bonding strength; diffusion layer thickness; interface hardness 1 Introduction The joining of materials by conventional welding... are different. In particular, the bonding of advanced materials is not possible by classical welding methods because of unexpected phase propagation at the bond interface[2]. Hence, diffusion bonding......
A Study on Shearing Failure Strength of Discontinuous Material Consisited of Cohesive and Cohesionless Particles Yasuo Tanigawa1,Zhuguo Li2,Hiroshi Mori3 (1.Dept. of Arch., Nagoya Univ., Nagoya...:The investigation on the shearing failure strength of discontinuous material such as soil and freshly mixed cementitious material etc. by microscopic approach is presented in this paper. After......