共搜索到7296条信息，每页显示10条信息，共730页。用时：0小时0分0秒379毫秒
, Zhejiang University3. College of Electrical Engineering, Zhejiang University摘 要:Smooth and strong copper foils are highly required for the development of printed circuit boards and Li-ion batteries. Adding additives is an efficient and low-cost method to enhance electrodeposited copper foils. Here we chose Bis-(3-sulfopropyl)-disulfide(SPS......
Copper foils with gradient structure in thickness direction and different roughnesses on two surfaces fabricated by double rollingXi-yong Wang1,Xue-feng Liu1,2,Wen-jiang Zou1,Jian-xin Xie2,31. School... and Technology Beijing3. Key Laboratory for Advanced Materials Processing Ministry of Education),University of Science and Technology Beijing摘 要:Copper foils......
to study diffusion phenomenon in friction stir welding(FSW) joints and its influence on the tensile strength of joints.To study diffusion in stir zone,various metallic foils were inserted between two pure aluminium plates.The thin foils of pure copper,pure zinc,brass and Cu-Zn-Ni alloy with the thickness of 250 μm were used as metallic foils.The transversal cross sections of welds were observed......
......
Article ID: 1003-6326(2005)02-0375-04 Interface evolution of TiAl/Ti6242 transient liquid phase joint using Ti, Cu foils as insert metals DUAN Hui-ping(段辉平)1, K. H. Bohm2, V. Ventzke2, (1... D-21502, Germany) Abstract: The interface evolution of TiAl/Ti6242 joint produced by transient liquid phase(TLP) bonding with Ti, Cu foils as insert metals was investigated. The results show......
......
copper foils HUANG You-ming, WANG Ping, HUANG Yong-fa (Jiangxi Copper-Yates Foil Corporation, Nanchang 330096, China) Abstract: Effects of surface roughness and erosion of titanium cathode drum on performance of electrolytic copper foils and surface images were studied by chemical treatments. The results show that surface roughness and contradict debonding intensity increases and etch factorial......
="ChDivSummary">Commercial grade rolled and electrodeposited copper foils from Japan and China were selected, and their mechanical properties and microstructure were investigated.It was observed that there are notable differences in fracture strength, elongation at break and hydrophilicity between rolled and electrodeposited copper foils. The rolled copper foils have higher tensile strength, lower......
......
the initial cross-section area and diameter respectively. A and d are those of the drawn single crystal copper wires. In order to analyze the crystal defects by TEM, the thin foils have been cut from... 9R structure in drawn industrial single crystal copper wires CHEN Jian(陈 建)1, 2, YAN Wen(严 文)1, 2, FAN Xin-hui(范新会)2 1. School of Materials Science and Chemical Engineering, Xi’an Technological......
