共搜索到2990条信息,每页显示10条信息,共299页。用时:0小时0分0秒201毫秒
Effects of Ti-bearing inclusions on the microstructure and mechanical properties of MAG multilayer weld metalXin WANG 1), Wenchao DONG 1), Shanping LU 1), Guangzhong HE 2), Xu ZHAO 2), Dianmai ZHOU 2...., Changchun 130026, China摘 要:The metal active gas (MAG) multilayer weld metal consists of the columnar grain zone (CGZ) and the fine grain zone (FGZ). Mechanical......
以及熔敷金属化学成分等进行分析,得出了焊接线能量对焊接接头组织和性能的影响规律.研究表明:对于22 mm厚的TA2合金,如果焊接过程控制合理,焊接线能量对焊接接头组织和性能的影响很小. 关键词:TA2钛合金;焊接接头;线能量;组织;性能 中图分类号:TG 407 文献标志码:A Influence of weld heat..., Luoyang 471039, China) Abstract: The influence of heat input on the structure and performance of weld joint was researched. The Vickers hardness, tensile properties, impact properties, metallurgical......
......
Effects of welding wire composition and welding process on the weld metal toughness of submerged arc welded pipeline steelDe-liang Ren1,2) ,Fu-ren Xiao1) ,Peng Tian3) ,Xu Wang3) ,and Bo Liao1) 1) Key... elements in welding wires and submerged arc welding process on the microstructures and low-temperature impact toughness of weld metals have been investigated. The results indicate that the optimal......
......
on weld structure of large thickness Ti-6Al-4V alloy with narrow-gap TIG welding method SUN Qing-jie1, GUO Ning1, HU Hai-feng2, FENG Ji-cai1 (1. Shandong Provincial Laboratory of Special Welding... experiment was conducted directing at the 56 mm-thickness Ti-6Al-4V titanium alloy. Afterwards, an analysis was taken to compare each weld joint microstructure by means of metallographic microscope......
Microstructure and corrosion behavior of the heat affected zone of a stainless steel 308L-316L weld jointCheng Ma1,2,Qunjia Peng1,Jinna Mei3,En-Hou Han1,Wei Ke11. Key Laboratory of Nuclear Materials...="ChDivSummary">Microstructure of the heat affected zone(HAZ) of a 308 L-316 L stainless steel(SS) weld joint and its corrosion behavior in high temperature water were studied. Peak of the residual......
......
INVESTIGATION OF THE LOW-CYCLE FATIGUE AND FATIGUE CRACK GROWTH BEHAVIORS OF P91 BASE METAL AND WELD JOINTS M.M.Yu1,H.C.Yang1,Y.Tu1,J.Zhao2 (1.Dongfang Boiler (Group;2.Department of Materials Engineering, Dalian University of Technology, Dalian 116023, China) Abstract:Low cycle fatigue tests and crack growth propagations tests on P91 pipe base metal and its weld joints were conducted at three......
). The intrinsic high-restraint weld structure, the additional stress/strain caused by the thermal expansion difference between AISI 316 L and 52 Mw as well as the detrimental carbide precipitation and the resulting grain boundary structure all add up to cause the occurrence of DCZ in the dissimilar metal weld.关键词:......