共搜索到312条信息,每页显示10条信息,共32页。用时:0小时0分0秒605毫秒
of composition of β-NiAI phase. The β-NiAI phase is formed by pack cementation on surface of superalloy. Results of the calculation show that interdiffusion coefficients in β-NiAI phase strongly depend......
Abstract: To improve the oxidation resistance of carbon/carbon (C/C) composites in air at high temperatures, a SiC- MoSi2/ZrO2-MoSi2 coating was prepared on the surface of C/C composites by pack cementation... method of pack cementation and slurry coating. The phase compositions and microstructures of the as-prepared SiC- MoSi2/ZrO2-MoSi2 multilayer coating were characterized. Meanwhile, the anti-oxidation......
......
, for example, Na2S deposition, Cu cementation, solvent extraction and ion exchange were observed, which lies on the ways of reactant blending and the HCl concentration. Those different phenomena suggest...Pd和Cu浓度的变化及置换率列于表3, 不同盐酸浓度测定的置换动力学曲线如图1所示. 表3 5.0mol/L HCl中Cu置换Pd(Ⅱ)的实验结果 Table 3 Results of Cu cementation of Pd(Ⅱ) in 5.0mol/L HCl solutions 图1 不同酸度下置换速率与时间的关......
cementation method were prepared on the surface of open-cell nickel-based alloy foam.The morphologies and microstructures of Y-and Ce-modified Cr coatings with various Y and Ce contents were investigated......
,and cementation mechanisms,were carried out to make good use of yellow phosphorus slag as well as tackle with environment problems,safety problems,geological hazards,and high-cost issues during mining in Kaiyang......
progressive damage layer by layer, and every layer probably suffers four stages, which are property strengthening stage, initial degradation stage, thaumasite formation stage and cementation loss......
flowability. SEM observation on the microstructure of the hardened tailings-AASC mixture pastes showed obvious cementation effect. MIP measurements also showed that the total porosity of the hardened......
-Y co-deposition coatings were prepared on Ti-Al alloy by pack cementation processes at 1 050 ℃ for 4 h with different halide activators in the packs for enhancing the high temperature oxidation......
alkaline leaching(IAL), thiosulfate leaching and cementation by zinc powder. The experimental results show that the grinding-leaching and intensified alkaline leaching process result in the selective..., the gold leaching rate by thiosulfate leaching for 24h is increased to 91.7% from 0-3.2% by ultra-fine grinding without the pretreatment. The recovery of gold by zinc cementation gets to 99.6%. Due......