共搜索到4233条信息，每页显示10条信息，共424页。用时：0小时0分0秒388毫秒
Nanoindentation and Wear Characteristics of Al 5083/SiC_p Nanocomposites Synthesized by High Energy Ball Milling and Spark Plasma SinteringSivaiah Bathula,Saravanan M,Ajay Dhar摘 要:Al 5083/10 wt% SiC p nano composites have been synthesized by means of high energy ball milling followed by spark plasma sintering (SPS). Nano composites produced via......
Morphology and magnetic properties of Sm2Co7/α-Fe nanocomposite magnets produced by high energy ball milling and spark plasma sinteringYitong Zhuge,Yuqing Li,Xiaochang Xu,Dongtao Zhang,Hongguo Zhang...="ChDivSummary" name="ChDivSummary">In this article,the Sm2 Co7/α-Fe nanocomposite magnets were prepared by high energy ball milling and spark plasma sintering method.The effect of soft phase content......
, China) Abstract: An effective process consisting of spray drying, hydrogen reduction and subsequent ball milling was adopted to fabricate W/Cu three-layer functionally gradient material (FGM... of the powder by reduction and ball milling process. W-10Cu and W-20Cu can get full density by sintering at 1 380 ℃ for 120 min after milling, and have more shrinkage than W-30Cu at the same sintering......
Research Institute4. Department of Mechanical Engineering,Hebei University摘 要:The melt spinning(MS) and ball milling(BM) technologies are thought to be efficient to prepare nanostructured Mg and Mg-based alloys for improving their hydrogen storage performances. In this paper, two technologies, viz. melt spinning and ball milling, were employed to fabricate......
Research Institute4. Department of Mechanical Engineering,Hebei University摘 要:The melt spinning(MS) and ball milling(BM) technologies are thought to be efficient to prepare nanostructured Mg and Mg-based alloys for improving their hydrogen storage performances. In this paper, two technologies, viz. melt spinning and ball milling, were employed to fabricate......
-MgO powders prepared by high-energy ball milling WU Cai-xia1, 2, ZHU Shi-gen1, 2, MA Jun1, 2, ZHANG Mei-lin1 (1. College of Mechanical Engineering, Donghua University, Shanghai 201620, China; 2. College of Materials Science and Engineering, Donghua University, Shanghai 201620, China) Abstract: The synthesis of nanocomposite WC-MgO powders was investigated by high-energy ball milling......
Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an 710072, China Received 21 December 2015; accepted 15 June 2016 Abstract: The effects of ball milling time...; nucleation; recombination; high-energy ball milling 1 Introduction The unique physical and chemical properties of hydrogen make it an outstanding energy carrier in the future out of public concern about......
......
was adhesive wear, in the Al/SiC nanocomposites, the wear mechanism changed to abrasive. Key words: Al 6061; SiC; nanocomposite; mechanical milling; corrosion; dry sliding wear; corrosive wear 1... to the uniform distribution of the nano-sized SiC particles as well as good interfacial characteristics achieved by mechanical milling and hot extrusion. SEM micrographs of dry sliding worn surfaces......
