共搜索到3216条信息，每页显示10条信息，共322页。用时：0小时0分0秒530毫秒
inside wide-band-gap materials [J]. Applied Physics Letters, 2008, 93(24): 243118. [14] CHO S H, KUMAGAI H, YOKOTA I, MIDORIKAWA K, OBARA M. Observation of self-channeled plasma formation and bulk...Trans. Nonferrous Met. Soc. China 22(2012) s808-s812 Internal modification in transparent hybrid germanium-silica plates using plasma formation induced by a femtosecond laser Ji-Wook YOON 1, Jung-Kyu......
Ti Coating on Magnesium Alloy by Arc-Added Glow Discharge Plasma Penetrating Technique PAN Jun-de1,MIAO Qiang1,ZHANG Gao-hui1,ZHANG Ping-ze1,CUI Cai-e1 (1.Research Institute of Surface Engineering, Taiyuan University of Technology, Taiyuan 030024, China;2.No.2 Research Institute of China Electronics Technology Group Corporation, Taiyuan 030024, China) 摘要:Arc-added glow discharge plasma......
Effect of Ti-Al on microstructures and mechanical properties of plasma arc in-situ welded joint of SiCp/Al MMCs LEI Yu-cheng(雷玉成), ZHANG Zhen(张 振), NIE Jia-jun(聂加俊), CHEN Xi-zhang(陈希章) School... by plasma arc in-situ weld-alloying was investigated, in which argon-nitrogen mixture was used as plasma gases and Ti-Al alloy as filling composite. The results show that the formation of needle-like......
. [17] YU Q, GAO J S. Microstrucutre and hardness of the coatings of nickel-base alloy coated by plasma arc [J]. Nonferrous Metals, 2004, 56(1): 13-16. (in Chinese) [18] WANG X B, LIU H. Metal powder... Plasma cladding of Stellite 6 powder on Ni76Cr19AlTi exhausting valve ZHU Yuan-zhi(朱远志)1,2, YIN Zhi-min(尹志民)2, TENG Hao(滕 浩)2 1. School of Material and Metallurgy, Wuhan University of Science......
Mechanical properties and microstructure of Fe3Al intermetallics fabricated by mechanical alloying and spark plasma sintering HE Qing(何 箐), JIA Cheng-chang(贾成厂), MENG Jie(孟 杰) School of Materials... properties of the Fe3Al based alloys were studied by spark plasma sintering from elemental powders (Fe-30Al, volume fraction, %) and mechanically alloying powders. The mechanically alloying powders were......
......
mixtures were milled for 24 h, and hot pressed in Ar gas atmosphere. The sintering temperature was 2 000 °C and 1 800 °C for composites H20S and H20S15A, respectively. The applied pressure was 30 MPa...J. Cent. South Univ. (2012) 19: 887-891 DOI: 10.1007/s11771-012-1088-0 Fabrication and plasma arc thermal shock resistance of HfB2-based ultra high temperature ceramics WENG Ling(翁凌)1, HAN Wen-bo(韩文波......
Porosity and surface roughness simulation of nickel-aluminum coating in plasma spray forming ZENG Hao-ping(曾好平)1, 3, FANG Jian-cheng(方建成)2, XU Wen-ji(徐文骥)1, ZHAO Zi-yu(赵紫玉)2, WANG Li(王 莉)2 1... of coating porosity and surface roughness of nickel-aluminum alloy (Ni-5%Al) in plasma spray forming was presented, which was based on the multi-dimensional statistical behaviors of the droplets as well......
of Ti-45Al-5Nb-1.5Cr-0.2W (mole fraction, %) with multiphases was prepared by spark plasma sintering (SPS) and heat-treating at 1 100 °C for 48 h. The relationship among sintering temperature, microstructure... and mechanical properties of TiAl alloys consolidated by spark plasma sintering [J]. Intermetallics, 2008, 16: 1134-1141. [11] WANG Y H, LIN J P. Microstructure and mechanical properties of Ti-45Al-8.5Nb-(W,B......
Properties of plasma sprayed NiCrAlY＋ZrO2 coating on TiAl alloy surface ZHOU Hai(周 海), CHEN Fei(陈 飞), L? Xiao-jing(吕晓静) College of Mechanical Engineering, Beijing Institute of Petrochemical Technology, Beijing 102617, China Received 15 July 2007; accepted 10 September 2007 Abstract: The NiCrAlY+ZrO2 thermal barrier coating was prepared on the surface of TiAl alloy by plasma......
