共搜索到13734条信息，每页显示10条信息，共1374页。用时：0小时0分0秒655毫秒
J. Cent. South Univ. (2021) 28: 386-397 DOI: https://doi.org/10.1007/s11771-021-4610-4 Removal of AlN from secondary aluminum dross by pyrometallurgical treatment WANG Jian-hui(王建辉)1, 2, ZHONG Ye... 2021 Abstract: A new process of AlN removal from secondary aluminum dross (SAD) by pyrometallurgical treatment with added cryolite was applied for solving the problem of recycling the secondary......
Effect of pre-strain on fatigue crack growth of 2E12 aluminum alloy YI Dan-qing(易丹青)1, 2, YANG Sheng(杨胜)1, 2, DENG Bin(邓斌)1, ZHOU Ming-zhe(周明哲)1 1. School of Materials Science and Engineering...> Abstract: The influences of pre-strain on the mechanical property and fatigue crack growth of 2E12 aluminum alloy were evaluated by SEM, TEM, mechanical property and fatigue tests......
J. Cent. South Univ. (2019) 26: 524-535 DOI: https://doi.org/10.1007/s11771-019-4024-8 Springback analysis of 6016 aluminum alloy sheet in hot V-shape stamping MA Wei-ping(马卫平), WANG Bao-yu(王宝雨...-Verlag GmbH Germany, part of Springer Nature 2019 Abstract: Springback behavior of 6016 aluminum alloy in hot stamping was investigated by a series of experiments under different conditions using V-shape......
Trans. Nonferrous Met. Soc. China 20(2010) s758-s762 Effect of semi-solid processing on microstructure and mechanical properties of 5052 aluminum alloy Lü Shu-lin(吕书林), WU Shu-sen (吴树森... Received 13 May 2010; accepted 25 June 2010 Abstract: The microstructure and mechanical properties of rheocasted 5052 aluminum alloy were investigated. The semi-solid slurry of this alloy......
Preparation, mechanical properties and wear behaviors of novel aluminum bronze for dies LI Wen-sheng(李文生)1, WANG Zhi-ping(王智平)1, LU Yang(路 阳)1, GAO Yong(高 勇)2, XU Jian-lin(徐建林)1 1. State Key...; Abstract: A modified single melt technique involving joint charging was developed for preparation of aluminum bronze, Cu-14%Al-X(mass......
and Engineering A, 1998, 251: 243-250. [6] HU J G, ISHIKAWA T, IKEDA K. Analysis on earing behavior of textured pure aluminum and A5083 alloy sheets[J]. Journal of Materials Processing Technology... Effect of evolution of polycrystalline textures onr-value of LF2 aluminum alloy ZHAO Yi-xi(赵亦希), LIN Zhong-qin(林忠钦), LI Shu-hui(李淑慧), YU Zhong-qi(于忠奇) School of Mechanical Engineering, Shanghai......
sheets and ultrathin foils such as iron steel [10], pure aluminum [11], magnesium alloys [12], and titanium and titanium alloys [13]. Ultrafine grains (UFGs) were obtained by asymmetric rolling... shape and had unequal length. Fig. 2 Microstructure of commercially pure aluminum with different thicknesses: Figure 2(b) shows the microstructures of the sample with a thickness of 100 μm......
......
Microstructure and properties of high silicon aluminum alloy with 2% Fe prepared by rheo-casting ZHONG Gu(钟 鼓), WU Shu-sen(吴树森), AN Ping(安 萍), MAO You-wu(毛有武), LI Shi-zhao(李世钊) State Key.... The semi-solid slurry of high silicon aluminum alloy was prepared by direct ultrasonic vibration (DUV) which was imposed on the alloy near the liquidus temperature for about 2 min. Then, standard test......
Aluminum production by carbothermo-chlorination reduction of alumina in vacuum YUAN Hai-bin(袁海滨)1, 2, 3, YANG Bin(杨 斌) 1, 2, 3, XU Bao-qiang(徐宝强) 1, 2, 3, YU Qing-chun(郁青春) 1, 2, 3, FENG Yue...; Abstract: Aluminum production by carbothermo-chlorination reduction of alumina in vacuum was investigated by XRD, SEM, EDS......
