共搜索到8958条信息，每页显示10条信息，共896页。用时：0小时0分0秒611毫秒
porthole die extrusion [16]. The volume fractions of DRX in the zones close to bridge and porthole wall were the highest. DRX in the welding zone, volume reduction of micro-voids and migration of grain......
:// www.onepetro.org/conference-paper/ISOPE-I-96-307. [33] ZHANG Kun-yong, SHI Jian-yong, YIN Zong-ze. Stability analysis of channel slope based on FEM strength reduction [C]// Proceedings of the 20th International......
a little reduction in phase change temperature, which is due to the weak interaction between the PCM and the interstitial surface of the micropores of supporting materials, which is corresponded......
into the melt, which in turn may translate into micro and macro porosity (voids or oxides) [24]. The reduction of turbulent flow during rheocasting results in decreasing the porosity formation that originates......
sizing applied. The extraction process contributed to the decrease of the surface roughness by 50%-70% for both the recovered and virgin fibers. Such a reduction (i.e., 50%-70%) could have untold effects......
should allow for a full recycling of organic matter and reduction of the potential risk associated with the presence of pollutants [3]. Conventional methods of SS management, for example, landfilling......
]. Applied Catalysis B: Environmental, 2015, 163: 487-498. DOI: 10.1016/j.apcatb.2014.08.031. [19] LONG R Q, YANG R T. Reaction mechanism of selective catalytic reduction of NO with NH3 over Fe-ZSM-5......
. It is obvious that the temperature and humidity cycling test leads to the largest reduction by 22.18%. Moreover, densities of CGN-(F+S)-2, CGN-(F+S)-4, CGN-(F+S)-5 decrease by 1.39%, 1.14% and 3.47......
and shows a reduction in the computational time of GA. Since the average design process did not follow the stope layout constraints, the average design feasibility and fitness value are assessed 12120......
strength for code equations, models in literature (calculated with strength reduction coefficient φ=1), and ANN models. Looking at the means, it is obvious that ACI 440.1R-15 [16], BISE-99 [18......
