共搜索到8907条信息，每页显示10条信息，共891页。用时：0小时0分2秒833毫秒
K, INOUE A, MASUMOTO T. Rapidly solidified powder metallurgy Mg97Zn1Y2Alloys with excellent tensile yield strength above 600 MPa [J]. Materials Transactions, 2001, 42(7): 1172-1176. [8] ZHU Y M......
with post-bonding heat treatment. XUE et al [21] utilized single Ti-based amorphous or Ni-based amorphous foils as an interlayer for the diffusion bonding of metallurgical powder TiAl- based alloy......
The structural features and morphologies were characterized by powder X-ray diffractometer (XRD, D8 ADVANCE X-ray diffractometer), scanning electron microscope (SEM/EDS, S-8010) and transmission electron......
samples were obtained by a scanning electron microscope (SEM, FET Quanta-200). The powder samples were dispersed on the surface of copper sheet, and then small gold particles were sprayed on the top......
University, Zhengzhou 450001, China; 3. State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China Central South University Press and Springer-Verlag GmbH Germany, part......
was agitated on a hot-plate at 80 °C and dried in an oven at 250 °C for 6 h to form an LSCF precursor powder. The as-synthesized precursor was calcined in a muffle furnace at 600 °C for 4 h at a heating rate......
grain was similar, 2-5 mm ore was used for X-ray powder diffraction. XRD analysis (Bruker-D8 Discover, Bruker, Mannheim, Germany) of the samples (Figure 1) shows that the main minerals were silicon......
By the age of 28 d, the corresponding specimens were crashed and the cement paste coating aggregate was scraped by a scraper ground into powder for the X-ray diffraction (XRD) analysis and Fourier......
, Central South University, Changsha 410083, China; 2. State Key Laboratory for Powder Metallurgy, Central South University, Changsha 410083, China) Abstract: The corrosion behaviours of imitate-gold Cu-Zn......
by powder metallurgy and hot extrusion[J]. Transactions of Nonferrous Metals Society of China, 2017, 27(9): 1947-1955. [23] OUYANG Yi, GAN Xue-ping, LI Zhou, et al. Microstructure evolution......
