共搜索到8625条信息,每页显示10条信息,共863页。用时:0小时0分1秒63毫秒
coating film[J]. The Chinese Journal of Nonferrous Metals, 2006, 16(5): 847-852. [13] 解 挺, 焦明华, 俞建卫, 吴玉程, 张立德. 准一维纳米材料制备方法的研究现状和发展趋势[J]. 材料科学与工程学报, 2006, 24(2): 311-315. XIE Ting, JIAO Ming-hua, YU Jian......
: Nanjing University of Aeronautics and Astronautics, 2007. [9] Moret F, Eustathopoulos N. Ceramic-to-metal direct brazing[J]. Journal de Physique, 1993, 3(7): 1043-1052. [10] Buhl S, Leinenbach C... Chemistry and Physics, 2004, 84(2/3): 251-258. [12] HIGASHI T, INOUE M, ONOKI T, YOKOTA M, MURATA Y, NAKAHIRA A. Development of low melting temperature coating materials for high performance diamonds wire......
-min, ZHOU Xiao-ping, PAN Yong-qing, ZHOU Xi-zhi. Microstructure and properties of cermet coating on surface of H13 steel by vacuum powder sintering[J]. Special Casting & Nonferrous Alloys, 2005, 25......
with the nanofluid enhancement behaviour, such as the formation of a nanoparticle coating layer along the boiling surface, occur in the evaporator section. The present model neglects all these effects......
/ 10.1016/j.ijleo.2019.162990. [61] HE Zhi-hui, ZHAO Ming-zhuo, CHEN Zhi-quan, XU Hui, LI Hong-jian. Keeping good sensing performance of metal-dielectric-metal waveguides after coating treatment [J]. IEEE......
on the model results were reduced by coating the inside of the walls with petroleum jelly. During the soil placement and compaction process, the instrumentation was installed at the appropriate depths......
processing manual[M]. Changsha: Central South University Press, 2000. [9] PIRHAYATI P, AVAL H J. Effect of post-heat treatment on friction surfaced Al-Cu-Mg alloy coating containing Ag[J]. Surface......
. Specifically, for the optical microscopy (OM, Zeiss Imager A1m) characterization, the sample was prepared by anodic coating at 0 °C in the solution of 2.5 vol.% HBF4 for 30 s at the voltage of 20 V. The field......
]. Journal of the Chinese Ceramic Society, 2001, 29(3): 232-237. [28] 李小斌, 刘祥民, 苟中入, 彭志宏, 刘桂华, 周秋生, 丁安平, 李 明, 刘业翔. 铝酸钠溶液碳酸化分解的热力学[J]. 中国有色金属学报, 2003, 13(4): 1005-1010.LI Xiao-bin, LIU Xiang-min, GOU......
SnAgCu中添加SiC颗粒和在SnAg中添加ZrO2纳米颗粒熔化温度变化也较小[47].微米级Ni颗粒添加到SnAgCu钎料,液相线的温度由219.9℃转变为220.5~221.8℃,Ni颗粒的添加对复合钎料的熔化温度影响较小[27],在SnAgCu-xNi钎料的研究,也发现了类似的现象[48].有研究者选择在Sn58Bi钎料中添加碳纳米管,发现纳米管对钎料熔化温度的影响不明显[49].对于目前研究者...循环和时效过程中含纳米颗粒SnAgCu均保持较高的焊球剪切强度,且保持较高的数据稳定性,下降幅度较小[69].纳米ZrO2颗粒添加在Sn3.0Ag0.5Cu中也发现纳米颗粒可以使焊点的剪切强度显著提高,研究者将其归因于第二相颗粒强化机制[70].纳米ZrO2颗粒在Sn9Zn钎料中也表现相类似的增强效果,同时还使焊点的力学性能在热循环过程中保持数据稳定性[71].在Sn3.5Ag中添加微量的纳米......