共搜索到8515条信息,每页显示10条信息,共852页。用时:0小时0分1秒84毫秒
): 1436-1441. [49] PEREZ M G, KENIL E A, O'KEEFE M J, MILLER F S, JOHNSON B. Identification of phases in zinc alloy powders using electron backscatter diffraction[J]. Materials Science and Engineering A, 2006......
of these small and high strength reinforcement phases, a uniform dispersion of those reinforcements throughout Al matrix is required. To reach this goal, depending on the type of reinforcement, different... NPs induce greater attenuation of ultrasonic incident wave, thereby resulting in higher values of attenuation coefficient. In addition, the presence of Al4C3 phases and crushed Al2O3 oxide layers......
was used for the experimental work. 2.2 Methodology and measurement In a separating funnel, 10 mL of the organic and aqueous phases were taken and vigorously shaken for 10 min except for shaking time......
phases. 2.4 Experimental verification The experimental platform can be built according to Figure 7(a). The main part of the experimental platform consists of frequency converter, variable frequency motor......
-based estimation of arrival times and back azimuths of seismic phases [J]. Geophysics, 2016, 81(2): KS25-KS40. DOI: 10.1190/geo2014-0357.1. [4] DING Liang, GAO Er-gen, LIU Qin-ya, QIAN Wei, LIU Dong-dong......
and intensity of rock mass. Figure 7 illustrates the evolution characteristics of MS event rate and accumulated energy release. This process can be divided into three phases. Phase I is before May 10, 2019......
loading, cracks mainly form along the axis of the load, and the cracks progress in two distinct phases. During the crack propagation phase, the fractal dimension increases rapidly as cracks initially......
the loading curve is used for DR phase and SIDR=2 indicates the loading curve is used for both DR and dynamic analysis phases. For the preloading calculation, the body force load and distributed pressure......
values from the magnesium alloy base metal to the joining point indicate an increase mainly due to grain refinement, the presence of intermetallic phases (Ti3Al), and the titanium phase. However......
dispersive spectroscopy (EDS). The phases present in the debris were determined by using an X-ray diffractometer (XRD, Rigaku D/Max 2500) employing Cu Kα radiation at a scan rate of 5 (°)/min......