共搜索到29786条信息，每页显示10条信息，共2979页。用时：0小时0分0秒390毫秒
="ChDivSummary" name="ChDivSummary">In order to improve the strength of short carbon fibers reinforced aluminum matrix(Csf/Al) composite, the dispersion of short carbon fibers with multi-orientation...Improved multi-orientation dispersion of short carbon fibers in aluminum matrix composites prepared with square crucible by mechanical stirringGuanglong Li1,Yingdong Qu1,Yaohua Yang2,Qiwen......
MPa for the ‘porous’ fly ash/6061Al and ‘dense’ fly ash/7075Al composite, respectively. Key words: metal matrix composites; porous material; fly ash; damping properties 1 Introduction The aluminum... particles were infiltrated by aluminum (Fig.1(a)). By contrast, the FA particles in FA/7075Al composite were nearly all infiltrated by the matrix alloy, leading to the porosity in FA particles was eliminated......
in the composite. Clusters of TiO2 particles were observed at a higher particle content of 18 vol%. The interface between the TiO2 particle and the aluminum matrix was characterized by the absence of pores...Microstructural Characterization and Tensile Behavior of Rutile(TiO2)-Reinforced AA6063 Aluminum Matrix Composites Prepared by Friction Stir ProcessingIsaac Dinaharan2,Esther Titilayo Akinlabi22......
: China Architecture & Building Press, 1984. [9]QIN Qing-wei, LAI Yan-qing, ZHANG Gang, et al. Solid state reaction synthesis of Ni(1-x)ZnxFe2O4 spinel used as matrix of inert anodes in aluminum... Article ID: 1003-6326(2005)03-0666-05 Densification of Ni-NiFe2O4 cermets for aluminum electrolysis LAI Yan-qing(赖延清), SUN Xiao-gang(孙小刚), LI Jie(李 劼), DUAN Hua-nan(段华南......
Analysis of Adiabatic Shearing Failure Mechanism for Aluminum Matrix Composites Based on Experimental and Numerical Simulation郑振兴1,朱德智21. School of Mechanical and Electronic Engineering,Guangdong... in splitting and cutting with a 45 degree, and the phase transformed bands of molten aluminum are found on the adiabatic shear layers. The deformation behavior and shear localization of the TiB2/Al......
. Theoretical results obtained by the DeformTM-2D simulation agree well with the experiments. Key words: magnesium matrix composite; liquid-solid extrusion; hot shortness cracks; surface cracks; finite... thermo-mechanical finite element simulation. However, for the simulation of forming magnesium matrix composite in semisolid state, there is a scarcity of information available in the open literature......
......
Pseudo-in-situ stir casting: a new method for production of aluminum matrix composites with bimodal-sized B4C reinforcementMohammad Raei,Masoud Panjepour,Mahmood MeratianDepartment of Materials Engineering, Isfahan University of Technology摘 要:A new method was applied to produce an Al-0.5wt%Ti-0.3wt%Zr/5vol%B4C composite via stir casting with the aim......
March 2014; accepted 20 July 2014 Abstract: The 6061 aluminum matrix composites reinforced with ZnO-coated Mg2B2O5w were fabricated by squeeze casting method and followed by extruded under a technical... content. Key words: aluminum matrix composites; Mg2B2O5 whisker; coating; extrusion; mechanical properties 1 Introduction Over the past two decades, metal matrix composites (MMCs) reinforced......
......
