共搜索到7808条信息，每页显示10条信息，共781页。用时：0小时0分1秒488毫秒
and micro-Raman scattering in Mn-doped ZnS nanocrystalline semiconductors [J]. Journal of Vacuum Science & Technology B, 2003, 21: 984-988. [39] TALWAR D N, AGRAWAL B K. Raman spectrum of cubic zinc......
moved to a freeze-drier for 24 h (with a vacuum degree of over 90% and temperature under –45°C). Figure 1 Size distributions of soil particles that passed through 2 mm sieve:(The red and blue numbers......
, LI Zi-yong, YU Qing-chun, LIU Da-chun, YANG Bin, XU Bao-qiang. Thermodynamic analysis and dynamics simulation on reaction of Al2O and AlCl2with carbon under vacuum [J]. Journal of Central South......
. A new dynamic recrystallization kinetics model for a Nb containing Ni-Fe-Cr-base superalloy considering influences of initial δ phase [J]. Vacuum, 2017, 14: 316-327. [14] CHEN Ming-song, LIN Yong......
parallel to ND or TD. Hereafter, samples are simply named according to their compression direction. The compression tests were carried out in vacuum at 700 °C and four strain rates of 0.001, 0.1, 1 and 10......
moulds at vacuum of about 30 Pa by using the impulsion hot pressing furnace (Jinxing Co., Ltd., Liaoning Province, China). The heating rate was 5 °C/min. 2.3 Test equipment and procedure 2.3.1 Phase......
indentation testing [J]. Vacuum, 2000, 58: 569-585. [19] Kim B M, Lee C J, Lee J M. Estimations of work hardening exponents of engineering metals using residual indentation profiles of nano-indentation [J......
to soak the cylindrical sample in the water until the sample is totally saturated so as to remove the air inside. And a vacuum method is taken before the water permeability capacity experiment. 2.3.5... and recording system, power system and vacuum-cooling water system. The maximum resolution of the instrument is 5 nm with 5-20 kV of acceleration voltage. Firstly, the sample is made into specimen blocks......
suspension was filtered, rinsed with ultrapure water, subsequently immersed in acetone under the vacuum, and finally freeze-dried over 24 h. The purpose of this step was the removal of the external......
) where ε0 can be defined as the permittivity of the vacuum (constant value), ε is the dielectric constant of the medium (tabulated value), δ is the thickness of the protective film of the inhibitor......
