共搜索到7468条信息，每页显示10条信息，共747页。用时：0小时0分1秒469毫秒
to be impervious, forming a thin layer on the solid particles [55]. This can be reported as a bioleaching process, which occurs via either intra- particle diffusion or diffusion through a product layer......
is the diameter of crack, whose shape is assumed to be equivalent to a thin disc; n is the unit direction vector of the crack; E(n, r) is the joint probability density function of n and r; and Ω is the entire......
specimens. Based on KIC (fracture toughness of Mode 1) validation (Table 7), it is observed that the obtained results are not valid, and this difference may be due to the thin plates and the brittle fracture......
of the control input signal in a thin boundary layer neighboring the switching surface, as follows: (41) In Figure 12......
for forming a thin layer on the surface of the wick, and this layer enabled the enhancement of the capillary transport along the heat pipe. The heat transfer could thus be higher than the expected by the simple......
with asymptotic methods. LEE et al [2] extended the model in Ref. [1] to the non-isothermal case for a thin vertical cylinder. These investigations were however restricted to Newtonian viscous flows......
of how the machined surface pattern would affect the thin interfacial oxide layer during the manufacturing process. It is believed that stability of such oxide layer depends on magnitude......
directions. 2 PIT physical mechanism based on MDM waveguides PIT effect can be observed in MDM waveguides. The MDM waveguide is composed of metal and a thin layer of dielectric sandwiched between two......
intercalated with thin sandstones and dolostones. The GD debris flow occurred in Tongzilin Gully located in forested mountain areas (27°28′27.47″N/ 102°29′03.45″E) on 8 August, 2017 and resulted in 25 deaths......
, 2013, 61(5): 1809-1819. [64] CALIGNANO F, CATTANO G, MANFREDI D. Manufacturing of thin wall structures in AlSi10Mg alloy by laser powder bed fusion through process parameters[J]. Journal of Materials......
