共搜索到9407条信息，每页显示10条信息，共941页。用时：0小时0分0秒698毫秒
grains is achieved. One reason is probably that, the DS alloy with cellular growth morphology has a homogeneous composition along the growth direction and slight transversal composition fluctuations......
of deformation and strength, compared with a homogeneous rock, its conditions of stability and failure are more complicated [1]. At present a layered rock can be treated theoretically......
of homogeneous soil slopes under rainfall [J]. Journal of Geotechnical and Geoenvironmental Engineering, 2007, 133(12): 1532-1543. [11] COLLINS B D, ZNIDARCIC D. Stability analyses of rainfall induced......
chloride) in the solution was varied between 0% and 16%. The resultant solution was stirred at 60 °C for 2 h to yield a clear and homogeneous solution. The sol-gel coating was made usually one day after......
is more homogeneous and equiaxed as extrusion ratio increases from 8 to 32. 3.2 Mechanical properties Fig.5 shows the mechanical properties of the chip-extruded alloy as a function of processing......
, sol-gel method presents certain advantages, such as the possibility of deposition onto complex-shaped substrates, obtaining uniform pore size, high pure and homogeneous products at low temperature......
] HOU?KOV? V, ?TENGL V, BAKARDJIEVA S, MURAFA N. Photoactive materials prepared by homogeneous hydrolysis with thioacetamide: Part 2-TiO2/ZnO nanocomposites [J]. J Phys Chem Solid, 2008, 69(7): 1623-1631......
prepare compact and homogeneous ZSM-5 coatings on different surfaces of cordierite. In addition to the regular ZSM-5 crystalloid, some amorphous crystals are also observed as marked in Fig.4(d......
of these materials causes great concerns. In this work, a superlight magnesium-lithium alloy is welded by tungsten inert gas (TIG) welding using a homogeneous wire. The microstructure is analyzed......
was narrower (0.36-103 ?m) compared with that after initial activation (0.78-301 ?m). With the increase of volume fraction, mean diameter decreases from 34.81 to 11.34 ?m, and the alloy was in homogeneous......
