共搜索到10581条信息，每页显示10条信息，共1059页。用时：0小时0分0秒356毫秒
Plastic deformation mechanisms of AZ31 magnesium alloy under high strain rate compression YANG Yong-biao(杨勇彪)1, 2, WANG Fu-chi(王富耻)1, TAN Cheng-wen(谭成文)1, WU Yuan-yuan(吴园园)1, CAI Hong-nian(才鸿年)1... attributed to the difficulty in activating a sufficient number of independent slip and twinning systems. During deformation, plastic strain is accommodated mostly by basal slip and tension twinning......
University of Technology, Changzhou 213001, China) Abstract: The effect of strain strengthening on the fatigue and cyclic plastic deformation of 022Cr17Ni12Mo2 stainless steel was studied. The results show that, the strain strengthening not only improves the yield strength, but also extends the fatigue life of 022Cr17Ni12Mo2. Moreover, the strain strengthening inhibits the cyclic plastic deformation. When......
Fabrication of nanostructure in inner-surface of AISI 304 stainless steel pipe with surface plastic deformationHongwang Zhang1,2,Yiming Zhao1,2,Yuhui Wang1,Huaxin Yu1,Chunling Zhang21. National.... Nano-austenite with an average boundary spacing of 20 nm was generated, followed by deformation microstructure characterized by shear bands, multi-and uni-directional twins and planar dislocation......
Effects of heat treatment and plastic deformation on structure and properties of Mg-9Al-1.2Nd-0.45Y-0.7Zn Mg alloy LI Yong-jun(李永军)1, ZHANG Kui(张奎)1, LI Xing-gang(李兴刚)1, MI Xu-jun(米绪军)1, XIONG... strength of the alloy were sharply increased while the elongation decreased rapidly. The failure of as-cast samples was mainly brittle fracture. After plastic deformation, the fracture patterns all......
to ensure move and/or plastic deformation of the solid phase particles during extrusion. Hence, the larger the extrusion ratio is, the greater the load is. 4 Conclusions 1) The microstructure during... Deformation and microstructure characterization during semi-solid extrusion of Al-4Cu-Mg alloy LU Ya-lin(卢雅琳)1, 2, LI Miao-quan(李淼泉)1, LI Xing-cheng(李兴成)1 1. School of Materials Science......
Surface nanocrystallization of 7A04 aluminium alloy induced by circulation rolling plastic deformation YE Hui-qiong(叶惠琼), FAN Xin-min(樊新民) Department of Materials Science and Engineering, Nanjing... by means of circulation rolling plastic deformation(CRPD), the grain refinement behavior and the hardness variation were examined. X-ray diffraction(XRD) and transmission electron microscopy(TEM......
......
Acoustic emission study of the plastic deformation of quenched and partitioned 35CrMnSiA steelYang Li1,2,Gui-yong Xiao1,2,Lu-bin Chen1,2,Yu-peng Lu1,21. Key Laboratory for Liquid–Solid Structural...) and austempering(AT). AE signals with high amplitude and high energy were produced during the tensile deformation of 35 Cr Mn Si A steel with retained austenite(RA) in the microstructure(obtained via Q-P......
Application of methods of X-ray diffraction analysis and acoustic emission on research of plastic deformation in steelsKORCHEVSKII Vyacheslav,RI Hosen摘 要:Results of researches on plastic deformation of steels were obtained by acoustic emission and X-ray methods.The new numerical-analytical method of the thin structure parameter determination on one......
Effects of Impurity on Microstructure and Hardness in Pure Al Subjected to Dynamic Plastic Deformation at Cryogenic TemperatureF. Huang, N.R. Tao and K. Lu Shenyang National Laboratory for Materials... samples with different purities (5N: 99.999%, 4N: 99.993%, and 2N: 99.7% in weight) subjected to dynamic plastic deformation at cryogenic temperatures. The saturated sizes of refined grains/subgrains......
