共搜索到70875条信息，每页显示10条信息，共7088页。用时：0小时0分0秒710毫秒
to the small amount of CNTs addition. Key words: CNTs; Al matrix composite; mechanical milling; microstructure 1 Introduction Particulate-reinforced metal matrix composites (MMCs) have the potential... between the metal and CNT. For this reason, the development of bulk fabrication methods for CNT-metal matrix composites was started on the basis of a mechanical mixing approach [8,9]. Efforts have thus......
......
Science and Engineering A, 2005, 393(1/2): 229-238. [6] PECH-CANUL M I, MAKHLOUF M M. Processing of Al-SiCp metal matrix composites by pressureless infiltration of SiCp preforms [J]. Journal... MPa to 250 MPa and increases with decreasing particle size. Key words: SiC/Cu composites; metal matrix composites; pressureless infiltration; wettability; mechanical property ......
,Portugal摘 要:Hybrid metal matrix composites consist of at least three constituents-a metal or an alloy matrix and two reinforcements in various forms, bonded... used for the present investigation are Al356/10SiC (wt%) metal matrix and Al356/10SiC-3mica (wt%) hybrid composites. The composites are fabricated using stir casting route. The drilling tests......
of Al-18Si piston, and the wear loss of the former is about 60%-68% as that of the latter.Key words:primary particle; Al matrix composites piston; hardness; wear resistance; centrifugal casting...离心铸造初生Si及Si/Mg2Si颗粒增强铝基复合材料的组织与性能林雪冬1, 2,刘昌明1,吕循佳1,郝旭红1(1. 重庆大学 材料科学与工程学院,重庆 400030；2. 重庆工程职业技术学院 机械工程学院,重庆400037)摘 要:采用离心铸造方法制备初生Si颗粒单独增强Al-18Si初生Si/Mg2Si颗粒混合增强Al-18Si-5Mg铝基复合材料活塞.研究内浇口尺寸,浇注温度,模具温度......
Technology of Metal Matrix Composites[P]. CN X94114284, 1994-05-20. [11]Fujii H, Nakae H, Okada K. Four wetting phases in AlN/Al and AlN composites/Al systems, models of nonreactive, reactive... particles by rare-earth on interfacial wettability of Al matrix composites YU Zhi-qiang1, 2, WU Gao-hui1, JIANG Long-tao1 (1. School of Materials Science and Engineering, Harbin Instritute......
): 115-121. [20] WANG A, RACK H. Transition wear behavior of SiC-particulate and SiC-whisker-reinforced 7091 Al metal matrix composites [J]. Materials Science and Engineering A, 1991, 147(2): 211-224..., Bentley, Western Australia 6102, Australia Received 31 March 2015; accepted 14 October 2015 Abstract: The effect of reinforcement on the wear mechanism of metal matrix composites (MMCs) was investigated......
, but the weldability of TiB2-reinforced Al MMCs was rarely reported. VIJAY and MURUGAN [7] studied the mechanical properties of friction stir welded Al-10%TiB2 (mass fraction) metal matrix composites...Trans. Nonferrous Met. Soc. China 23(2013) 1543-1548 Evolution behavior of TiB2 particles during laser welding on aluminum metal matrix composites reinforced with particles Chao MENG, Hai-chao CUI......
Trans. Nonferrous Met. Soc. China 30(2020) 863-871 Microstructures and mechanical properties of Al 2519 matrix composites reinforced with Ti-coated SiC particles Cui-ge DONG, Rui CUI, Ri-chu WANG... particles were developed by vacuum evaporation with Ti to improve the interfacial bonding of SiCp/Al composites. Ti-coated SiC particles and uncoated SiC particles reinforced Al 2519 matrix composites were......
STUDY ON THE THERMODYNAMICS OF CuO/Al IN SITU Al2O3 REINFORCED Al MATRIX COMPOSITES Y.Ma1,Y.Hao1,X.N.Lu1,S.Z.Kou1 (1.State Key Lab. of Advanced Nonferrous Materials, Lanzhou University... of heat effect of CuO/Al system under different temperature are also caculated. Key words:composites in situ; thermodynamics; CuO; Al; exothermic dispersion; [全文内容正在添加中] ......
