共搜索到13709条信息,每页显示10条信息,共1371页。用时:0小时0分0秒354毫秒
Structural Characterization of Laser Bonded Sapphire Wafers Using a Titanium Absorber Thin FilmA.de Pablos-Martín,S.Tismer,Th.Hche摘 要:Two sapphire substrates were tightly bonded by irradiation with a 1064 nm nanosecond laser and using a sputtered 50 nm-titanium thin film as an absorbing medium.Upon laser irradiation,aluminum from the upper substrate......
Trans. Nonferrous Met. Soc. China 22(2012) s639-s644 Microstructures of brazing zone between titanium alloy and stainless steel using various filler metals Taeshin CHUNG1, Jungsoo KIM2, Jeongseok..., Korea Received 21 May 2012; accepted 6 November 2012 Abstract: Titanium alloy (Ti-Al-V alloy) substrate was brazed with stainless steel (STS304) using filler metal. At an optimized brazing condition......
strength of bonded joints were examined. Experimental results show that the oxide film on the surface of the composites is a key factor affecting the tensile strength of boned joints. The distribution... solution (α-Al) with increasing the vibration time.
Key words: SiCp/ZL101A; diffusion bonding; vibration; interface structure; oxide film CLC number: TG453
Document code: A
Semiconductor performance of rare earth gadolinium-doped aluminum–zinc oxide thin filmJun-Chen Dong1,2,De-Dong Han2,Fei-Long Zhao1,2,Nan-Nan Zhao1,2,Jing Wu1,2,Li-Feng Liu2,Jin-Feng Kang2,Yi Wang21. Shenzhen Graduate School,Peking University2. Institute of Microelectronics,Peking University摘 要:Rare earth element gadolinium-doped aluminum–zinc oxide(Gd......Semiconductor performance of rare earth gadolinium-doped aluminum–zinc oxide thin film
来源: 《Rare Metals2016年第9期》——Jun-Chen Dong De-Dong Han Fei-Long Zhao Nan-Nan Zhao Jing Wu Li-Feng Liu Jin-Feng Kang Yi Wang
Fabrication procedure of HA/Al2O3 biocomposite coating on titanium 1) Deposition of Al film on titanium by PVD Commercially pure titanium was cut into small discs with a dimension of 18 mm diameter... of -100 V bias voltage, 5.0 A aluminum target current, and 60 min duration at a pressure of 2.66×10-4 Pa. Pure aluminum film with a thickness of approximately 2.5 μm finally formed on titanium disc. 2......
Effect of Yttrium Implantation on Microstructure and Adhesive Property of Nickel Oxide Film靳惠明1,周小卫11. College of Mechanical Engineering, Yangzhou University摘 要:oxide film might have better high temperature plasticity and could......
EIS Characterization of Sealed Anodic Oxide Films on Titanium Alloy Ti-10V-2Fe-3Al刘建华,WU Liang,YU Mei,LI Songmei,WU Guolong,ZHANG YouSchool of Materials Science and Engineering, Beihang University摘 要:Anodic oxide films grown on titanium alloy Ti-10V-2Fe-3Al in the solution of sodium tartrate, then sealed in boiling deionised water and calcium acetate......
ELECTROCHEMICAL PROPERTIES AND MICROSTRUCTURE OF Ir-Ta-Ti METAL OXIDE COATED TITANIUM ANODES L.K.Xu1,G.Z.Chen1,T.Y.Wang1 (1.Qingdao Branch of Luoyang Ship Material Research Institute, Qingdao 266071, China) Abstract:Ir-Ta-Ti metal oxide coated titanium anodes prepared by thermal decomposition at aif-ferent calcination temperatures were characterized by scanning electron microscopy,cyclic......
Fabrication and characterization of anodic oxide films on a Ti-10V-2Fe-3Al titanium alloyJian-hua Liu,Jun-lan Yi,Song-mei Li,Mei Yu,and Yong-zhen Xu School of Materials Science and Engineering,Beihang University,Beijing 100191,China摘 要:Anodic oxide films of the titanium alloy Ti-10V-2Fe-3Al in ammonium tartrate electrolyte without hydrofluoric acid......
Carbon-Doped Titanium Oxide Films by DC Reactive Magnetron Sputtering Using CO2 and O2 as Reactive GasDong Xie1,2,Feng Wen3,Wenmao Yang4,Xueyuan Li4,Yongxiang Leng2,Guojiang Wan2,Hong Sun2,Nan... Manufacturing Technology,China Academy of Engineering Physics摘 要:CO2and O2were employed as reactive gases to fabricate carbon-doped titanium oxide films using......