共搜索到639条信息，每页显示10条信息，共64页。用时：0小时0分0秒877毫秒
] ZHAO Y, LIU H B, ZHAO C Y. Experimental study on the cycling stability and corrosive property of Al-Si alloys as phase change materials in high-temperature heat storage [J]. Solar Energy Materials......
composite of Al6061/SiO2. The mechanical, corrosive and wear properties of surface composite prepared by FSVP were superior to those prepared by FSP due to the formation of small grains and more homogenous......
to intergranular corrosion, especially when it is exposed to the corrosive environment [2,3]. For the above reasons, it is necessary to introduce a new thermomechanical method in which strength and corrosion......
potential is lower, which is easily corroded. It could also be resulted from the fact that Cl- destroys the passivation film on the surface of the alloy, causing the corrosive liquid to penetrate......
temperature) under the loading-unloading process. The most common electrochemical technique used to examine the corrosion resistance of xAg/ Ti-Ta SMAs is potential polarisation (PDP) in a corrosive medium......
A. Electro-chemical investigation for the effect of rebar source and surface condition on the corrosion rate of reinforced concrete structures under varying corrosive environments [J]. Constr Build Mater......
process passive film on Al in a corrosive aqueous environment[J]. ACS Appl Mater Interfaces, 2011, 3(11): 4206-4214. [16] BA Zhi-xin, ZHANG, Xiao-bo, WANG Zhang-zhong, FANG Xin-xian, DONG Qiang-sheng......
was evaluated using a M352 system composed of EG&G273 potentiostat connected to a computer. The corrosive medium was Hank’s simulated balanced salt solution (HBSS), whose temperature during the test......
resistance of TiAl alloy, a promising substitute for nickel-based superalloy [1-6]. If used in aerospace, however, corrosive substances such as NaCl/KCl, Na2SO4/K2SO4 and Na2VO3 may deposit on TiAl......
, the influence of the corrosive environment on the mechanical properties should be fully understood. 4 Conclusions (1) The interfacial microstructure of Ti/TiCuNi/Ti brazed joints could be described......
