共搜索到639条信息,每页显示10条信息,共64页。用时:0小时0分1秒17毫秒
in addition to HA and Mg(OH)2. XRD peaks observed at 2θ value of 37.5° indicate the presence of Mg(OH)2 as an alkalized layer. Nonetheless, the corrosive media can penetrate the HA coating as well......
and corrosive wear of Al/SiC nanocomposites [J]. Transactions of Nonferrous Metals Society of China, 2016, 26: 1801-1808. [40] EL-SAYED S M, ALMAJIDl A A, LATIF F H. Effects of graphite on the corrosion......
): 9150-9156. [16] NOURI M, LI D Y. Maximizing the benefit of aluminizing to AZ31 alloy by surface nanocrystallization for elevated resistance to wear and corrosive wear [J]. Tribology International, 2017......
to the dispersion of Al2O3. This is considered as one of the limitations of this study. In order to avoid this effect, powder coating process can be deployed to improve its corrosive property. Acknowledgements......
production [42,43], and (3) roughness increase which results in a greater surface area exposed to the corrosive medium and an increase in pit stability [43]. Moreover, the generated wear debris can cause......
of time constant (t) is usually modelled by a CPE. These plots indicate that the two time contants t are coupled, representing two corrosive processes as described before, and it could be through double......
with corrosive media surfaces of the pre-quenched and naturally aged initial rod and CR sheet revealed that in both cases it could be described as commonly undamaged with numerical separate corrosion spots......
for corrosion was exposed to corrosive media (NaCl and H2SO4) for 200 h. The pH of the solution was measured before corrosion test by pH meter. After corrosion test, samples were cleaned using acetone and dried......
[11] NABHANI M, RAZAVI R S, BAREKAT M. Corrosion study of laser cladded Ti-6Al-4V alloy in different corrosive environments [J]. Engineering Failure Analysis, 2019, 97: 234-241. DOI: 10.1016/j......
particles; (4) chemical corrosive wear of cemented carbide. The wear of WC-12Co cemented carbide was caused by one or more of the above mechanisms in WC-12Co composite coatings [34,35]. At first, at a low......