共搜索到2545条信息，每页显示10条信息，共255页。用时：0小时0分0秒571毫秒
......
Flattening behavior of copper droplets in plasma spray forming ZENG Hao-ping(曾好平) School of Mechanical Engineering, University of Science and Technology Liaoning, Anshan 114051, China; Received... spray forming 1 Introduction Plasma spray forming has found a wide range of applications in the manufacturing of molds and parts with good material versatility, low manufacturing cost and short cycle......
Ultrasonic Plasma Spray--A New Plasma Spray Process WEN Xiong-wei1,LI Lu-ming1,ZHANG Hua-tang1,LU Zhi-qing1 (1.Department of Mechanical Engineering, Tsinghua University, Beijing 100084, China) 摘要:The method of arc- ultrasonic is introduced into plasma spray process. The process of spray ZrO2-NiCoCr AlY thermal barrier coatings (TBCs) using air plasma spray (APS) process is studied. A exciting......
Modeling and experimental verification of tubular product formation during spray forming LIU Dong-ming(刘东明)1, 2, ZHAO Jiu-zhou(赵九洲)3, LI Mu-sen(李木森)1, 2 1. Key Laboratory of Liquid Structure... geometry of a tubular product prepared by spray forming. The effects of several important processing parameters on the shape evolution of the tube are investigated. The model is validated against......
of SiC-AlN composite powders obtained by spray drying GUO Xing-zhong1, YANG Hui1, ZHANG Ling-jie1, MA Qi1, LI Hai-miao1, GAO Li-hua2, FU Pei-xin2 (1. Department of Materials Science... with fluidized spray drying, and the powder characteristics, sintering behaviors and strengthening mechanism of SiC-AlN multiphase ceramic were investigated. The results shows that the flow......
; 文章编号:1672-7207(2012)07-2560-06 Influence of drying solvents on silica aerogels at ambient pressure LU Bin, ZHOU Qiang, SONG Miao, WEI Qi-qing, HUANG Huan (School of Materials Science... pressure drying. The results indicate that SiO2 aerogels dried in solvent mixtures have properties superior to aerogels dried in single solvent, SiO2 aerogel dried in solvent mixture (hexane......
......
Porosity and surface roughness simulation of nickel-aluminum coating in plasma spray forming ZENG Hao-ping(曾好平)1, 3, FANG Jian-cheng(方建成)2, XU Wen-ji(徐文骥)1, ZHAO Zi-yu(赵紫玉)2, WANG Li(王 莉)2 1... 2006 Abstract: As the important evaluation parameters concerning the spray qualities, the porosity and surface roughness of the coatings obtained by thermal spray forming have great influence......
......
Trans. Nonferrous Met. Soc. China 23(2013) 1413-1420 Silicon/flake graphite/carbon anode materials prepared with different dispersants by spray-drying method for lithium ion batteries Jun LAI, Hua... January 2012; accepted 18 March 2013 Abstract: Silicon/flake graphite/carbon (Si/FG/C) composites were synthesized with different dispersants via spray drying and subsequent pyrolysis, and effects......
