共搜索到22616条信息，每页显示10条信息，共2262页。用时：0小时0分0秒619毫秒
temperature are the main parameters. In this experimental study, the effects of processing parameters of selective laser sintering and sintering furnace on the mechanical properties of 316L stainless... mm were manufactured, for each processing parameters, according to the conditions listed in Table 1. The green specimens were sintered in a vacuum furnace (p=10-3 Pa). The sintering temperature of all......
of the measured data are shown in Table 1. Table 1 Main parameters of GF-3 satellite measured data Figure 8 is the result of processing the measured data of the GF-3 satellite over the distributed data... J. Cent. South Univ. (2020) 27: 842-852 DOI: https://doi.org/10.1007/s11771-020-4335-9 GF-3 data real-time processing method based on multi-satellite distributed data processing system YANG Jun(杨军......
Trans. Nonferrous Met. Soc. China 22(2012) 147-156 Significance-based optimization of processing parameters for thin-walled aluminum alloy tube NC bending with small bending radius XU Jie, YANG He... constraints. A significance-based optimization method of the parameters was proposed based on the finite element (FE) simulation, and the significance analysis of the processing parameters on the forming......
Optimization of separation processing of copper and iron of dump bioleaching solution by Lix 984N in Dexing Copper Mine LIU Qing-ming(刘清明)1, 2, YU Run-lan(余润兰)1, 3, QIU Guan-zhou(邱冠周)1, 3, FANG... and Chemical Engineering, Central South University, Changsha 410083, China; 3. School of Minerals Processing and Bioengineering, Central South University, Changsha 410083, China; 4. School......
J. Cent. South Univ. Technol. (2009) 16: 0349-0353 DOI: 10.1007/s11771-009-0059-6 A new method of characterizing equivalent strain for equal channel angular processing ZHAO Jun(赵 军)1, 2, 3...: In order to establish the quantitative relationship between equivalent strain and the performance index of the deformed material within the range of certain passes for equal channel angular processing (ECAP......
impedance electrodes with high stability, the chemical etching process was used to fabricate the copper electrode with a series of surface microstructures. By changing the etching processing parameters, some.... Key words: bioelectrical impedance; copper electrode; chemical etching; surface microstructures; processing parameters 1 Introduction Bioelectrical impedance technology can use the surface electrodes......
. Modelling the correlation between processing parameters and properties in titanium alloys using artificial neural network [J]. Comput Mater Sci, 2001, 21: 375-394. [20] SHA W, EDWARDS K L. The use... Constructing processing map of Ti40 alloy using artificial neural network SUN Yu1, ZENG Wei-dong1, ZHAO Yong-qing2, ZHANG Xue-min1, MA Xiong1, HAN Yuan-fei1 1. State Key Laboratory......
J. Cent. South Univ. (2019) 26: 3328-3337 DOI: https://doi.org/10.1007/s11771-019-4256-7 Parameters estimate of recurrent quantum stochastic filter for time variant frequency periodic signals ZHOU... square method. Finally, the parameters of the quantum filter can be determined step by step by analyzing the characteristics of the actual signal. The simulation results of single-frequency signal......
Effects of processing parameters and addition of flame-retardant into moulding sand on the microstructure and fluidity of sand-cast magnesium alloy Mg-10Gd-3Y-0.5ZrYanlei Li1,Guohua Wu1,Antao... of processing parameters(such as pouring temperature and mould pre-heating temperature) and flame-retardant content on the microstructure and fluidity of sand-cast magnesium(Mg) alloy Mg-10Gd-3Y-0.5Zr(GW103K......
Influence of Processing Parameters on Microstructural Evolution and Tensile Properties for 7075 Al Alloy Prepared by an ECAPBased SIMA ProcessJin-Long Fu1,Hong-Jun Jiang2,Kai-Kun Wang11. School of Materials Science and Engineering, University of Science and Technology Beijing2. Wuxi Turbine Blade Co., Ltd摘 要:A modified strain-induced melt activation......
