共搜索到21594条信息，每页显示10条信息，共2160页。用时：0小时0分0秒759毫秒
Trans. Nonferrous Met. Soc. China 22(2012) s619-s623 Friction stir butt welding of A5052-O aluminum alloy plates Sung-Ook YOON1, Myoung-Soo KANG1, Hyun-Bin NAM1, Yong-Jai KWON1, Sung-Tae HONG2, Jin... (FSW) between A5052-O aluminum alloy plates with a thickness of 2 mm was performed. The rotation speeds of the welding tool were 2000 and 3000 r/min, respectively. The traverse speed was ranged from 100......
Friction stir welding of 5052 aluminum alloy plates Yong-Jai KWON1, Seong-Beom SHIM2, Dong-Hwan PARK2 1. School of Materials Science and Engineering, University of Ulsan, Ulsan, Korea; 2...; Abstract: Friction stir welding between 5052 aluminum alloy plates with a thickness of 2 mm was performed......
resistance is about -6.5. Key words: robot friction stir welding; 6061 aluminum alloy; axial force; mechanical properties Foundation item: Project(2018YFB1306400) supported by the National Basic... Astronautica, 2014, 93(1): 366-373. [2] 李红. 城轨铝合金车体侧墙搅拌摩擦焊技术研究[D]. 哈尔滨工业大学, 2014. LI Hong. Research on friction stir welding technology for side walls of urban rail aluminum alloy carbody[D]. Harbin......
welded 6061 aluminum alloy (T6-temper condition) to copper [J]. Journal of Materials Processing Technology, 2006, 172: 110-122. [9] LIU Peng, SHI Qing-yu, WANG Wei, WANG Xin, ZHANG Zeng-lei... Dissimilar friction stir welding between 5052 aluminum alloy and AZ31 magnesium alloy YAN Yong(鄢 勇), ZHANG Da-tong(张大童), QIU Cheng(邱 诚), ZHANG Wen(张 文) School of Mechanical and Automotive......
Trans. Nonferrous Met. Soc. China 27(2017) 2137-2145 Effect of nano-silver on microstructure, mechanical and tribological properties of cast 6061 aluminum alloy G. PITCHAYYAPILLAI1, P. SEENIKANNAN1... relating to aluminum alloyed with nano-silver particles, although these alloys are very hopeful for improving the mechanical properties of aluminum alloy. It is tremendously demanding for the traditional......
Trans. Nonferrous Met. Soc. China 25(2015) 3056-3063 Influences of electric-hydraulic chattering on backward extrusion process of 6061 aluminum alloy Xin-hua HU1,2, Zhi-heng WANG1 , Guan-jun BAO1... were performed on 6061 aluminum alloy billets at room temperature. The experimental results showed that 5.65% reduction in the extrusion load was attained if the die and ejector were vibrated......
Trans. Nonferrous Met. Soc. China 28(2018) 1216-1225 Numerical simulation of friction stir butt-welding of 6061 aluminum alloy Peng-cheng ZHAO, Yi-fu SHEN, Guo-qiang HUANG, Qi-xian ZHENG College... computational fluid dynamics model was established to simulate the friction stir butt-welding of 6061 aluminum alloy. The dynamic mesh method was applied in this model to make the tool move forward and rotate......
-step ageing treatment on tensile properties and intergranular corrosion of 6061 aluminum alloy[J]. The Chinese Journal of Nonferrous Metals, 2010, 20(3): 435-441. [22] 李 海, 潘道召, 王芝秀, 郑子樵. T6I6时效对6061铝合金拉伸及晶间腐蚀性能的影响[J]. 金属学报, 2010, 46(4): 494-499.LI Hai, PAN Dao-zhao, WANG Zhi-xiu, ZHENG Zi-qiao. Influence of T6I6 Temper on tensile and intergranular corrosion properties of 6061 aluminum alloy[J......
Chemical compositions of 6061 Al alloy (mass fraction, %) 从铸锭上切取尺寸为d 3 mm×3 mm的DSC试样及d 18 mm×5 mm的硬度试样.试样经570 ℃,7 h固溶处理后,室温水淬.利用Q2000 DSC进行差热分析,用高纯铝作为标样,以10 K/min的升温速度从50 ℃加热到550 ℃.采用HB-3000B布氏硬度测试仪进行硬度测试,加载时间30 s,每组试样测8个点,取平均值. 图1 SiCp/6061复合材料及6061铝合金的DSC曲线 Fig. 1 DSC curves for SiCp/6061 composites and 6061 aluminum alloys 1.2 结果与讨论 图1所示为SiCp/6061和6061合金的DSC分析曲线.由图1可知......
]. International Journal of Mechanical Sciences, 2017, 122: 244-254. [25] LI Wen-ke, ZHAN Li-hua, ZHAO Jun. Effect of hot stamping process on forming quality of 6061 aluminum alloy U-shaped parts [J... J. Cent. South Univ. (2019) 26: 524-535 DOI: https://doi.org/10.1007/s11771-019-4024-8 Springback analysis of 6016 aluminum alloy sheet in hot V-shape stamping MA Wei-ping(马卫平), WANG Bao-yu(王宝雨......
