共搜索到18811条信息，每页显示10条信息，共1882页。用时：0小时0分0秒762毫秒
Trans. Nonferrous Met. Soc. China 23(2013) 2518-2523 Effect of Mg and semi solid processing on microstructure and impression creep properties of A356 alloy B. AMIR ESGANDARI1, B. NAMI2, M. SHAHMIRI1... University, Tehran, Iran Received 1 November 2012; accepted 2 May 2013 Abstract: The effects of Mg and semi solid processing on the creep properties of A356 Al alloy were investigated. The results show......
Trans. Nonferrous Met. Soc. China 25(2015) 3189-3196 Effects of cooling rate on solution heat treatment of as-cast A356 alloy Chang-lin YANG, Yuan-bing LI, Bo DANG, He-bin , Feng LIU State Key... of the solidification process on the following solution heat treatment of A356 alloy was investigated, where the cooling rates of 96 K/s and 3 K/s were obtained by the step-like metal mold. Then the eutectic silicon......
Trans. Nonferrous Met. Soc. China 29(2019) 43-50 Spatial interfacial heat transfer and surface characteristics during gravity casting of A356 alloy Jia-hua LIN, Hai-dong ZHAO, Jia-min HUANG National... that spatial heat transfer across casting-mold interfaces is the direct result of different interface evolution during solidification process. Key words: A356 alloy; solidification; interfacial heat transfer......
Trans. Nonferrous Met. Soc. China 25(2015) 2137-2146 Microstructure characterization and mechanical properties of gas tungsten arc welded cast A356 alloy S. TAKHTI, M. REIHANIAN, A. ASHRAFI... and mechanical properties of the gas tungsten arc welded cast A356 alloy were investigated with fillers ER1100, ER4043, ER4047 and ER5356 under the pulse frequencies of 1, 3 and 5 Hz. Results showed......
Trans. Nonferrous Met. Soc. China 27(2017) 336-351 Wear and corrosion resistant coatings on surface of cast A356 aluminum alloy by plasma electrolytic oxidation in moderately concentrated aluminate... 1 September 2016 Abstract: Plasma electrolytic oxidation of a cast A356 aluminum alloy was carried out in aluminate electrolytes to develop wear and corrosion resistant coatings. Different......
......
......
Trans. Nonferrous Met. Soc. China 24(2014) 3465-3476 Influence of melt pouring temperature and plate inclination on solidification and microstructure of A356 aluminum alloy produced using oblique... of A356 aluminum alloy using an oblique plate was investigated. A356 alloy melt undergoes partial solidification when it flows down on an oblique plate cooled from underneath by counter flowing water......
Influence of process parameters on microstructure of semisolid A356 alloy slug cast through vertical pipe YANG Xiao-rong(杨小容), MAO Wei-min(毛卫民), PEI Sheng(裴 胜) School of Materials Science... a vertical pipe. Different lengths of vertical pipe, slug dimensions and pouring time were used to investigate their influence on the microstructure of A356 alloy. The results indicate that at the same length......
investigated. The grain features and mechanical properties of A356 alloy made from this alloy during the several re-melted times were also studied. The results show that the Al-based alloy after re-melted for 6 times, and A356 after re-melted for 3 times, both remained and refined grains and A356 alloy could achieve favorable mechanical properties. All these should be attributed to the electrolyzing......
