共搜索到15238条信息，每页显示10条信息，共1524页。用时：0小时0分0秒797毫秒
effect of both normal and shear strain specific energies, the concept of the total equivalent strain specific energy (TESSE) at an oblique section and a new strength theory named as limiting strain energy..., and the corresponding strength criteria are established. The relationship among tensile, compressive and shear yield strengths are also given. 2 Current existing strength theories Maximum principal stress theory......
on stud connectors with normal and high-strength concrete. It was concluded that the grade of concrete introduced significant effects on the shear bearing capacity of studs. A load-slip relationship... studs under effect of bending-induced concrete cracks has been carried out by XU et al [14]. Combining test results and ABAQUS analysis, stud shear stiffness, shear strength, and push-out damage were......
. In addition, a parametric study was carried out, including the effects of strain-hardening exponent, strain rate sensitive coefficient, thermal-softening exponent, static shear strength, strain-hardening... is the density; A, B, C, m, and n are the static shear strength, strain-hardening modulus, strain rate sensitive coefficient, thermal-softening exponent and strain-hardening exponent, respectively; γe......
. The FEM results agree well with experimental results. Key words: aluminum alloy plate; snake hot rolling; speed ratio; offset distance; cross shear zone 1 Introduction Aluminum alloy with high strength...J. Cent. South Univ. (2017) 24: 296-302 DOI: 10.1007/s11171-017-3430-7 Analysis of strain variation in cross shear zone of plate during snake hot rolling ZHANG Tao(张涛)1, 2, 3, WU Yun-xin(吴运新)1, 2, 3......
temperature. It is indicated that higher imposed shear strain rate results in higher peak strength. At the same level of flow shear stress, higher shear strain rate leads to higher peak temperature... Temperature distribution in adiabatic shear band for ductile metal based on JOHNSON-COOK and gradient plasticity models WANG Xue-bin(王学滨) Department of Mechanics and Engineering Sciences......
Int Congress. 2006: 384-390. [5] OZENER P. Estimation of residual shear strength ratios of liquefied soil deposits from shear wave velocity [J]. Earthq Eng Eng Vib, 2012, 11: 461-484. DOI... J. Cent. South Univ. (2021) 28: 1476-1492 DOI: https://doi.org/10.1007/s11771-021-4711-0 Shear wave velocity in granular soil considering effects of inherent and stress-induced anisotropy Bayat......
soldering methods respectively. Fig.1 shows the schematic diagram of LY-FCDL-WS90 diode-laser soldering system. The shear force of micro-joints was tested by STR-1000 joint strength tester made in Japan... grains and intermetallic compound particles. The shear strength of the Sn-Ag-Cu alloy system mainly depends on the fine eutectic network structures, and the dispersion morphology of fine Ag3Sn......
剪试验；剪切次数；峰值抗剪强度Shear strength and morphology characteristic evolution of joint surface under cyclic loadsXIA Cai-chu1, 2, SONG Ying-long1, 2, TANG Zhi-cheng1, 2, SONG Ying-jie3(1. Key Laboratory... for four times, the relationship among the peak shear strength, shear test times and normal stress and between the roughness coefficient and shear test times were analyzed. A new shear strength......
was changed. To test the shear behavior of joint in laboratory, the effect of water content to the shear characteristic of joint was studied,and the water effect of joint shear strength was analyzed... be categorized to the slipping mode. With the increase of normal stress on the joint sample,the shear strength of joint increases correspondingly. And with the decrease of normal stress, the shear displacement......
to investigate the failure mechanism of rock joint [1–7]. The key constitutive law was established for rock joint under shear work, and the correlation between the shear strength of rock joints... condition are more suitable to investigate the shear behavior of rock joints in slopes, while the tests under CNL condition are more widely used to evaluate the peak shear strength in laboratory and field......
