共搜索到75条信息，每页显示10条信息，共8页。用时：0小时0分2秒332毫秒
-temperature wear property of hot-press sintering FeAl intermetallic compound [J]. Journal of Rare Earths, 2009, 27(6): 1031-1036. [8] LIANG Ying-jiao, CHE Yin-chang. Inorganic thermodynamic data sheet...-ray diffraction patterns of Al2O3/TiAl composites with 5% Sm after being hot pressed at various temperatures for 2 h. According to XRD analysis, there is no reaction among Ti, Al, TiO2 and Sm2O3......
of GF/Pb composites Figure 2 shows the effect of GF fraction and sintering temperature (200 °C) on the relative density of the GF/Pb composites after vacuum hot-press sintering. It is found... GF were prepared with the method of powder metallurgy processes including mixing and hot-pressing. The effect of the GF size and the content on the fabrication was investigated. Simultaneously......
sturcture[J]. J Appl Phys, 1988, 64: 6044-6046. [2]LU Bin, YI Dan-qing, YAN Biao, et al. Hot-press sintering of MA Fe-based nanocrystalline/amorphous soft magnetic powder[J]. Trans Nonferrous Met Soc China, 2004, 14(4): 686-691. [3]Kawamura Y, Inoue A, Kojima A, et al. Consolidation of amorphous Fe-Zr-B powders by hot-pressing method[J]. Journal of the Japan Society of Powder and Powder Metallurgy......
and a dense sample was obtained by the following hot press. Key words: multilayered composites; Ti-Al based intermetallics; self-propagating high-temperature synthesis; voids; cold rolling; annealing 1... °C for 30 min, 2 h and 24 h in the tube furnace, respectively. Hot press was subjected to the sample annealed at 950 °C for 24 h. Hot press process was conducted under the compression stress of 35 MPa......
the mold was put into the chamber of ZM-18-10Y type vacuum- hot-press, the chamber was pumped to a pressure of 0.005 MPa, and then the mold with nano-structured Ag particles was heated for 30 min in order..., Chengdu 610065, China ? Central South University Press and Springer-Verlag Berlin Heidelberg 2011 Abstract: Silver nano-particles with average diameter of about 60 nm were compacted in a high......
of chalcopyrite-type CuInSe2[J]. Journal of Physics and Chemistry of Solids, 2005, 66(11): 1987-1989. [11] KOMAKI H, YOSHINO K, SETO S, YONETA M, AKAKI Y, IKARI T. Growth of CuInS2 crystals by a hot-press......
, the XRD pattern of FeCrAl(f)/HA composite with 7% FeCrAl fiber (22 μm in diameter and 1-2 mm in length) is shown in Fig. 4. It can be clearly seen that during the hot-press sintering HA crystallization...: FeCrAl fiber-reinforced hydroxyapatite (HA) biocomposites (FeCrAl(f)/HA) were fabricated by the hot pressing technique. The metallographic microscopy, X-ray diffractometry, scanning electron......
of NiTi/Al6061 shape memory composite material by hot-press method and its mechanical property[J]. Materials Transactions, 2004, 45(2): 264-271. [21] MIZUUCHI K, INOUE K. HAMADA K. Processing of NiTi SMA fiber... with tailored microstructure by reaction hot pressing[J]. The Chinese Journal of Nonferrous Metals, 2013, 23(Special 1): s696-s701. [6] 黄立国, 孔凡涛, 杜赵新, 肖树龙, 徐丽娟, 陈玉勇. 少量B/TiB2对近β钛合金Ti-B20铸态组织的影响[J]. 中国有色金属学报......
in the composite materials in this experiment, because the hot-press sintering technology was used, the temperature throughout was too low to produce interface chemical reaction. So, the interface... to produce SiCp/Al composites in solid state by eliminating the reaction between reinforcement and matrix. CHENG et al [9] used a powder metallurgy route followed by hot extrusion to fabricate the SiCp/Al......
Peng-tao, WU Wei, ZENG Yuan-song. Microstructure analysis of Ti-Al3Ti metal-intermetallic laminate(MIL) composites synthesized by hot-press sintering[J]. Materials Science and Technology, 2013, 21(2..., 2001. ZHANG Yong-gang, HAN Ya-fang, CHEN Guo-liang. Intermetallic structure materials[M]. Beijing: National Defense Industry Press, 2001. [3] HANAMURA T, HASHIMOTO K. Ductility improvement of direct-cast......
