共搜索到5712条信息，每页显示10条信息，共572页。用时：0小时0分0秒946毫秒
processing aluminium alloys via additive manufacturing technique[J]. Physics Procedia, 2011, 12(1): 393-401. [55] ABOULKHAIR N T, EVERITT N M, ASHCROFT I, TUCK C. Reducing porosity in AlSi10Mg parts......
, NIU Fu-jun, LIN Zhan-ju, SHANG Yun-hu. Porosity of crushed rock layer and its impact on thermal regime of Qinghai-Tibet Railway embankment [J]. Journal of Central South University, 2017, 24(4): 977-987......
into the furnace and melted. The melt was degassed by carbon hexachloride at 1023 K, and stirred to obtain uniform mixing. The slag on the melt surface was removed to avoid the formation of porosity or void during......
and lithofacies uniformity, and a low porosity and water content. This granite is a coarse-grained heterogeneous material mainly composed of plagioclase, quartz, and other minerals, as revealed......
Trans. Nonferrous Met. Soc. China 26(2016) 1447-1471 Stress corrosion cracking behaviour of 7xxx aluminum alloys: A literature review A. C. UMAMAHESHWER RAO1, V. VASU1, M. GOVINDARAJU2, K. V. SAI SRINADH1 1. Department of Mechanical Engineering, National Institute of Technology Warangal, Warangal 50......
. A highly ordered titania nanotube array as a supercapacitor electrode[J]. Physical Chemistry Chemical Physics, 2011, 13: 5038-5041. [83] LIN Jia, LIU Kun, CHEN Xian-feng. Synthesis of periodically......
solution using a graphite electrode modified by Co(II) HFPC. And stable superoxide ions were also observed in the SMS media by JIN et al [15], as presented in Fig. 7. Fig. 7 Comparison of CV curves......
DC power supply, solution (20% perchloric acid + 80% methanol), and reference electrode (stainless steel). The polishing of samples (3 mm in diameter and 0.1 mm in thickness) for TEM study......
(redox potential) values of the leaching slurry were measured twice per day by using a Mettler Toledo pH and φ instrument, with an Ag/AgCl reference electrode. The pH of the leaching slurry continuously......
boning adjacent to the weld root [69]. Aluminum alloys from 0.5 to 65 mm in thickness have been welded using FSW with full penetration from one side without defects like porosity and voids [70......
