共搜索到5520条信息，每页显示10条信息，共552页。用时：0小时0分1秒415毫秒
on the model results were reduced by coating the inside of the walls with petroleum jelly. During the soil placement and compaction process, the instrumentation was installed at the appropriate depths......
. Then, electrolytic polishing was conducted in a solution of 70 vol.% perchloric acid + 9 vol.% alcohol followed by anode coating in a solution of 38 vol.% concentrated sulfuric acid + 43 vol......
processing manual[M]. Changsha: Central South University Press, 2000. [9] PIRHAYATI P, AVAL H J. Effect of post-heat treatment on friction surfaced Al-Cu-Mg alloy coating containing Ag[J]. Surface......
. Specifically, for the optical microscopy (OM, Zeiss Imager A1m) characterization, the sample was prepared by anodic coating at 0 °C in the solution of 2.5 vol.% HBF4 for 30 s at the voltage of 20 V. The field......
. FS lap welding using intermediate layer is also found effective during joining of Al-Cu. Use of a new anodized material Al-MIL-A-8625F containing coating of anodic sulfur with a layer of 23 mm-thick......
section. Improvement in thermal performance was the result of changes in thermophysical properties and coating layer existence. Obtained results for the heat transfer coefficient improvement at the mass......
during the blending process. When temperature exceeds the melting point of wax, the melting of wax makes modified bitumen more flowable, allowing for easier coating and mixing. Meanwhile......
forces from rock blocks. Cutters today can either incorporate hard, fine grained carbides into the matrix of the disc material or apply a hardened coating of alloy powder on the steel substrate......
Trans. Nonferrous Met. Soc. China 26(2016) 1447-1471 Stress corrosion cracking behaviour of 7xxx aluminum alloys: A literature review A. C. UMAMAHESHWER RAO1, V. VASU1, M. GOVINDARAJU2, K. V. SAI SRINADH1 1. Department of Mechanical Engineering, National Institute of Technology Warangal, Warangal 50......
](a)；狭缝喷涂法[73](b)；卷对卷工艺[74](c) Fig. 10 Schematic illustration of diverse methods for perovskite solar cells, including one-step spin-coating method, two-step spin-coating method, sequential...锌的原理图[210](a),裸锌电极和纳米碳酸钙涂层锌箔在循环过程中的形态演变示意图[211](b) Fig. 38 Schematic diagrams for Zn deposition on a bare Zn electrode and a PA layer coating Zn electrode[210](a), schematic illustrations......
