共搜索到5526条信息，每页显示10条信息，共553页。用时：0小时0分1秒42毫秒
% Si, 0.3% Mg, and 0.12% Fe, with the rest Al. The solidus and liquidus of the alloy were 560 and 615 °C, respectively. The A356 alloy was placed inside a well-type resistance furnace and was heated......
the first 1 h of the creep ageing process; (2) sequentially heat using a furnace; (3) remove the creep-aged specimen from the furnace after ECA test, and then air cooled to room temperature......
master alloy is basically close to the Mg melting point, which reduces the temperature required for subsequent alloy smelting. All materials were melted in an electrical resistance furnace under CO2......
-hai, CHEN Gang, et al. Melt of Mg-Li alloy using vacuum electric resistance furnace[C]// Chinese Society of Mechanical Engineering. 2012 China Foundry Activity Week. Suzhou: Foundry Branch of Chinese......
furnace (PLF 130/12, Turkey). The formed oxide thickness was measured using Image Pro Plus 6 software program. The average oxide thickness of laser melted coatings was calculated by 10 measurements......
furnace and sintered at 175 °C for 2 h. Finally, the SAC/Ag-GNSs (Table 1) samples were punched using a hydraulic press. Table 1 Chemical composition of Sn-Ag-Cu/Ag-GNSs alloy (wt.%) Figure 1......
Trans. Nonferrous Met. Soc. China 27(2017) 2113-2136 Friction stir welding of aluminum to copper-An overview Nidhi SHARMA, Zahid A. KHAN, Arshad Noor SIDDIQUEE Department of Mechanical Engineering, Jamia Millia Islamia, New Delhi, India Received 12 September 2016; accepted 20 January 2017 Abstract: ......
-controlled resistance furnace. In order to avoid thermal shock damage caused by sudden temperature change of the samples during the heating/cooling process [24], each rock sample was slowly heated with a lower......
in an electric furnace to allow for foam formation at 680 °C in 3 min. Once the foaming was completed, the crucible was taken out and cooled down in air to solidify the foam and prevent hydrogen from......
with an alumina layer to avoid contamination) using an electric resistance furnace. Firstly, Zn was melted at a temperature of 650 °C, after stoichiometric amounts of Mg and Mn or Ca were added......
