共搜索到441条信息，每页显示10条信息，共45页。用时：0小时0分0秒220毫秒

• Recovery of titania from high titanium slag by roasting method using concentrated sulfuric acid

  来源： 《Rare Metals2015年第12期》——Li-Li Sui Yu-Chun Zhai Li-Hua Miao

  Recovery of titania from high titanium slag by roasting method using concentrated sulfuric acidLi-Li Sui1,2,Yu-Chun Zhai2,Li-Hua Miao11. Department of Chemistry, Shenyang Medical College2. School of Materials and Metallurgy, Northeastern University摘 要:By means of energy-dispersive X-ray spectroscopy(EDX) and scanning electron microscope(SEM)analysis......

• The Synthesis, Characterization, Photocatalytic Evaluation and Deactivation Behavior of Sheet-like Nano Titania

  来源： 《Journal Of Wuhan University Of Technology Materials Science Edition2012年第5期》——蔡国发 刘保顺

  The Synthesis, Characterization, Photocatalytic Evaluation and Deactivation Behavior of Sheet-like Nano Titania蔡国发1,刘保顺1,21. State Key Laboratory of Silicate Materials and Architectures (Wuhan University of Technology)2. School of Materials Sciences and Engineering,Wuhan University of Technology摘 要:The sheet-like nano TiO2 particles were prepared......

• Al/Ti0₂SELF-COMBUSTION SYNTHESIS REACTION

  来源： 《中国有色金属学报(英文版)1996年第1期》——Hu Wenbin Luo Shoufu Zhang Guoding Zheng Ziqiao Liu Yexiang

  ......

• High temperature characteristic of hydroxyapatite-titania

  来源： 《中国有色金属学报(英文版)2005年第z3期》——汪涛 张文彦 D.R.Annett S.Sabine

  ......

• High Cr（Ⅵ） adsorption capacity of rutile titania prepared by hydrolysis of TiCl₄ with AlCl₃ addition

  来源： 《International Journal of Minerals Metallurgy and Materials2020年第8期》——Shun Wu Xiao-bo He Li-jun Wang Kuo-Chih Chou

  High Cr(Ⅵ) adsorption capacity of rutile titania prepared by hydrolysis of TiCl4 with AlCl3 additionShun Wu1,Xiao-bo He2,Li-jun Wang1,2,Kuo-Chih Chou21. Collaborative Innovation Center of Steel... titania(TiO2) was successfully prepared via hydrolysis of TiCl4 in the presence of AlCl3.The powders were characterized by X-ray powder diffraction(XRD),scanning electron microscopy(SEM),and Brunauer......

• 含钛铁素体不锈钢连铸浸入式水口结瘤机理研究

  来源： 《钢铁钒钛2010年第2期》——张贺佳 陈伟庆 吴狄峰 郑宏光

  含钛铁素体不锈钢连铸浸入式水口结瘤机理研究张贺佳1,陈伟庆1,吴狄峰2,郑宏光3(1.北京市北京科技大学 冶金与生态工程学院2.宝钢研究院不锈钢技术中心,上海 2004313.宝钢研究院不锈钢技术中心,上海 201900)摘 要:采用光学显微镜和扫描电镜,对00Cr18Ti铁素体不锈钢钢样中夹杂物类型和浸入式水口结瘤物的物相进行分析,研究水口结瘤机理.结果表明,钢液中存在大量TiO2夹杂物,并不断附着沉积在水口内壁,造成浸入式水口氧化钛型结瘤;通过控制钢中w[Al]-w[Ti]值在铝钛竞争氧化反应平衡曲线之下,......

• TiO₂-FeO-(SiO₂,CaO,MgO)三元渣系的流变特性

  来源： 《中国有色金属学报2016年第9期》——李生平 吕学伟 宋兵 缪辉俊 韩可喜

  temperature with SiO2 content 图4  TiO2-FeO-SiO2黏度测试后物相分析 Fig. 4  XRD patterns of TiO2-FeO-SiO2 ternary titania slag 图5  TiO2-FeO-CaO三元渣系黏温曲线 Fig. 5  Viscosity-temperature curves of ternary...  熔化性温度随CaO含量变化曲线 Fig. 6  Change curve of melt-property temperature with CaO content 图7  三元钛渣黏度测试后的物相分析 Fig. 7  XRD patterns of ternary titania slag system of TiO2-FeO-CaO 三元钛渣......

• 纳米TiO₂的热分析及晶化动力学

  来源： 《中国有色金属学报2001年第z1期》——刘河洲 陈鸿雁 吴人洁

   ......

• 高钛渣制备TiN/β′-Sialon 复相导电陶瓷及其性能

  来源： 《中国有色金属学报2011年第11期》——姜涛 薛向欣 李江 段培宁

  from high titania slag-based mixture JIANG Tao, XUE Xiang-xin, LI Jiang, DUAN Pei-ning  (School of Materials and Metallurgy, Northeastern University, Shenyang 110819, China) Abstract: The TiN/β′-Sialon electroconductive composites were fabricated by pressureless sintering from TiN/β′-Sialon powder that was synthesized by the carbothermal reduction nitridation method using high titania slag......

• 多孔 TiO2光催化纳米薄膜的制备和微观结构研究

  来源： 《无机材料学报2000年第2期》——赵修建 余家国

  Ca元素；同时发现薄膜表面的羟基含量随聚乙二醇的加入量的增加而增加. 关键词:溶胶-凝胶法; 多孔TiO2纳米薄膜; 制备; 微观结构; sol-gel method; porous titania nanometer thin films; preparation; microstructure; [全文内容正在添加中] ......