共搜索到43942条信息，每页显示10条信息，共4395页。用时：0小时0分0秒581毫秒
As the third generation of armor alloy developed by USA in the 1980s, 2519 aluminum alloy has some advantages such as light-mass, high strength as well as high corrosion resistance. Up to today, most work... is less than 6.0%, the strength of 2519 aluminum alloy increases with the increase of Cu content; when the content of Cu is more than 6.0%, the strength of the alloy decreases. The hardening effect......
Microstructures and mechanical properties of high strength Mg-Zn-Mn alloy ZHANG Ding-fei(张丁非)1, 2, SHI Guo-liang(石国梁)2, DAI Qing-wei(戴庆伟)2, YUAN Wei(袁 炜)2, DUAN Hong-ling(段红玲)2 1. National... aging that provide more effective nuclei for Mg-Zn strengthening phases during the second step aging. Key words: high strength; Mg-Zn-Mn alloy; microstructures; mechanical properties ......
and GLARE, indicating that CARALL exhibited the highest ultimate tensile strength and fracture toughness. Due to high stiffness, carbon fiber offers stronger bridging to aluminum alloy than aramid fiber... in delamination. The reduction of interlaminar shear strength has a similar linear relationship with the corrosion time. In addition, the adhesive layers between carbon fiber and aluminum alloy cannot......
2519, which has been developed into aluminum alloy 2519A, has been used extensively in naval structures, such as advanced amphibious assault vehicle(AAAV) because of its high specific strength... yield stress; Y is the static yield stress that is equal to 420 MPa for aluminum alloy 2519A; is the strain rate; B and q are material parameters. Eqn.(1) can be used to predict the high strain......
with high tensile strength for the FSW of A5052-O alloy plates. On the other hand, the total elongation of the FSWed aluminum alloy plates was lower than that of the base metal. Especially... conditions 3.4 Tensile properties Figure 7 shows the average ultimate tensile strength and total elongation of the FSWed aluminum alloy plates. The tensile strength of the FSWed plates was similar......
(Broken line represents average hardness of base metal plate) 3.4 Tensile properties Fig.7 shows the average ultimate tensile strength and total elongation of the FSWed aluminum alloy plates. At 500, 1... metal, suggesting that there are optimum tool rotation speeds in order to obtain sound welds with high tensile strength for the FSW of A5052-O alloy plates. The elongation of the FSWed plates is lower......
CO2 laser welding of 5A06 aluminum alloy plates with different thicknesses YU Shu-rong(余淑荣)1, 2, FAN Ding(樊 丁) 1, 2, XIONG Jin-hui(熊进辉)1, CHEN Jian-hong(陈剑虹)1, 2 1. State Key Laboratory... in TWB specimen. The weld microstructure shows extra-fine grains. Dendrite exists around weld fusion line and the equiaxed grains in the weld. Key words: aluminum alloy; laser welding; tailor welded......
J. Cent. South Univ. (2012) 19: 2081-2085 DOI: 10.1007/s11771-012-1248-2 Underwater friction stir welding of ultrafine grained 2017 aluminum alloy WANG Kuai-she(王快社), WU Jia-lei(武佳蕾), WANG Wen(王文... and Springer-Verlag Berlin Heidelberg 2012 Abstract: 2017 aluminum alloy plates with an ultrafine grained (UFG) structure were produced by equal channel angular processing (ECAP) and then were joined......
; Abstract: The microstructures of 7050 aluminum alloy under different thermal exposure conditions were investigated by means of transmission electron microscopy (TEM), high resolution... be responsible for the strength decline and elongation rise of 7050 alloy during thermal exposure. Key words: 7050 aluminum alloy; thermal exposure; microstructure ......
Annulus electromagnetic stirring for preparing semisolid A357 aluminum alloy slurry BAI Yue-long(白月龙), XU Jun(徐 骏), ZHANG Zhi-feng(张志峰), SHI Li-kai(石力开) General Research Institute...; Abstract: The effects of pouring temperature and annulus gap width on the microstructure of the semi-solid A357 aluminum alloy......
