共搜索到18647条信息，每页显示10条信息，共1865页。用时：0小时0分0秒221毫秒

• Study on Thermomagnetic Treatment Fe-25.5Cr-12Co Permanent Magnetic Alloy

  来源： 《材料热处理学报2004年第5期》——Zhen Liang GAO Run-sheng ZHU Dan-yang SUN Xue-yin SHAO Wen-zhu XU Ren-gen

  Study on Thermomagnetic Treatment Fe-25.5Cr-12Co Permanent Magnetic Alloy Zhen Liang1,GAO Run-sheng2,ZHU Dan-yang1,SUN Xue-yin1,SHAO Wen-zhu1,XU Ren-gen1 (1.Technology and Development Centre... Fe-25.5Cr-12Co alloy by different process of thermomagnetic treatment were investigated. It is found that magnetic properties are sensitive to parameters of thermomagnetic treatment process in magnetic......

• Bridgman法制备塑性钛基轻质非晶复合材料

  来源： 《金属学报2011年第2期》——张建庭 乔珺威 张勇

  Bridgman法制备塑性钛基轻质非晶复合材料张建庭1,乔珺威1,张勇1(1.北京市北京科技大学新金属材料国家重点实验室)摘 要:通过Bridgman定向凝固法成功制备了内生枝晶增塑的轻质钛基非晶复合材料.与传统的Cu模吸铸法相比,Bridgman法有效消除了铸态组织中的孔洞,得到了更均匀的微观组织,且能通过调节抽拉速度来控制枝晶相的尺寸和分布,进而优化其力学性能.当抽拉速度为1.4 mm/s时,合金压缩屈服强度,断裂强度和断裂塑性分别达到1956 MPa,2706 MPa和18.0%,且有明显的加工硬化现象.......

• Derivation and application of concentration formula of alloy genes of DO₃-type in BCC alloy systems

  来源： 《中南大学学报(英文版)2018年第7期》——彭红建 李玲 李小波 谢佑卿

  is the theory of the characteristic crystals and points out direction of alloy design. The theory has been successfully applied to Ag–Cu alloys [1, 2] and Au–Cu alloys [3–6] in FCC structure, Ti–Al... J. Cent. South Univ. (2018) 25: 1573-1581 DOI: https://doi.org/10.1007/s11771-018-3849-x Derivation and application of concentration formula of alloy genes of DO3-type in BCC alloy systems PENG......

• 提高高温钛合金性能的途径

  来源： 《中国有色金属学报1997年第4期》——萧今声 许国栋

  ......

• Thermostability of Al-Cu-Mg-Fe-Ni Alloy with Trace Scandium and Zirconium

  来源： 《材料科学与工程学报2000年增刊第1期》——Yu Kun Li Songrui Li Wenxian

  Thermostability of Al-Cu-Mg-Fe-Ni Alloy with Trace Scandium and Zirconium Yu Kun1,Li Songrui1,Li Wenxian1 (1.Department of Materials Science and Engineering, Central South University of Technology,Changsha 410083, P. R. China) 摘要:Three Al-Cu-Mg-Fe-Ni-Sc-Zr ingot metallurgy alloys with different compositions had been prepared. The hardness variations of cold-rolled alloy plates during annealing......

• SPECIFIC HEAT MEASUREMENTS OF ZrAlNiCuCo ALLOY

  来源： 《中国有色金属学报(英文版)1999年第1期》——Zhao Ming Li Jianjun Jiang Qing

   ......

• INJECTION MOLDED TUNGSTEN HEAVY ALLOY

  来源： 《中国有色金属学报(英文版)1998年第4期》——Li Yimin Qu Xuanhui Li Zhilin Huang Baiyun

  ......

• QUENCH IN STABILIZATION OF Cu-Zn-Al ALLOY

  来源： 《中国有色金属学报(英文版)1997年第3期》——Peng Kun Tan Shusong Li Shutang Chung C Y Lam C W H

   ......

• Effects of additives on corrosion and wear resistance ofmicro-arc oxidation coatings on TiAl alloy

  来源： 《中国有色金属学报(英文版)2010年第6期》——吴向清 谢发勤 胡宗纯 王立

  assessed by the electrochemical tests and wear tests. 2 Experimental 2.1 Materials and coating preparation A γ-TiAl alloy with nominal composition (mole fraction) of 48%Ti, 48%Al, 2%Cr, 2%Nb was used... and biocompatibility of hard Ti-based coatings using plasma immersion ion implantation-assisted deposition [J]. Surface and Coatings Technology, 2005, 196(1/3): 312-316. [3] REINHOLD B, MAIK F......

• Hot-compression behavior of Al alloy 5182

  来源： 《中南大学学报(英文版)2012年第8期》——唐建国 黄星星 张新明

  in Al-3Mg alloy after 0.2%Sc was added. A model of microstructural and texture evolution during the hot tandem rolling process of 5××× aluminum has been developed by WELLS et al [5-7]. Based...J. Cent. South Univ. (2012) 19: 2073-2080 DOI: 10.1007/s11771-012-1247-3 Hot-compression behavior of Al alloy 5182 TANG Jian-guo(唐建国), HUANG Xing-xing(黄星星), ZHANG Xin-ming(张新明) School of Materials......