共搜索到6874条信息，每页显示10条信息，共688页。用时：0小时0分0秒545毫秒
J. Cent. South Univ. (2017) 24: 284-295 DOI: 10.1007/s11171-017-3429-0 Hot deformation behavior and constitutive modeling of Q345E alloy steel under hot compression QIAN Dong-sheng(钱东升)1, 2, 3, PENG... in many fields because of its eminent formability under elevated temperature. In this work, the deformation behavior of Q345E steel was investigated by hot compression experiments on Gleeble-3500......
Hot deformation behavior of spray formed Al-22Si-5Fe-3Cu-1Mg alloyJIA Yan-dong, CAO Fu-yang, NING Zhi-liang, SUN Xiao-bing, SUN Jian-fei(School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China)Abstract:The hot deformation behavior of a spray formed Al-22Si-5Fe-3Cu-1Mg alloy was investigated by isothermal compression tests at temperature ranging from 350......
S, MORI K. Hot stamping and press quenching of ultrahigh strength steel sheet using resistance heating [J]. Key Engineering Materials, 2007, 344: 309-316. [11] MORI K, SAITO S, MAKI S. Warm and hot... state forming of aluminum alloy [J]. Journal of Material Processing Technology, 2002, 125-126: 477-482. [13] MORI K, MAKI S, TANAKA Y. Warm and hot stamping of ultra high tensile strength steel sheets......
Hot deformation of spray formed nickel-base superalloy using processing maps KANG Fu-wei(康福伟)1, 2, ZHANG Guo-qing(张国庆)3, LI Zhou(李 周)3, SUN Jian-fei(孙剑飞)1 1. School of Materials Science...; Abstract: The hot compression testing of hot isostatically pressed(HIPed) spray formed(SF) nickel-base superalloy......
Effect of Rare Earths on Hot Cracking Resistant Property of Mg-Al Alloys Guo Xutao1,Zeng Daben1,Zheng Weichao2,Tang Bin3,Li Shuangshou2 (1.Department of Mechanical Engineering;2.Fundamental Industry Training Center;3.Department of Engineering Mechanics, Tsinghua University, Beijing 100084, China) Abstract:The effect of rare earths (RE) ranging from 0.1% to 1.2%(mass fraction) on hot cracking......
Microstructure evolution of 7050 aluminum alloy during hot deformation LI Jun-peng(李俊鹏), SHEN Jian(沈 健), YAN Xiao-dong(闫晓东), MAO Bai-ping(毛柏平), YAN Liang-ming(闫亮明) General Research...; Abstract: Hot compression of 7050 aluminum alloy was performed on Gleeble 1500D thermo-mechanical simulator at 350......
Crystallographic research of spangle on hot dip galvanized steel sheets LU Jin-tang(卢锦堂), WANG Xin-hua(王新华), CHE Chun-shan(车淳山), KONG Gang(孔 纲), CHEN Jin-hong(陈锦虹), XU Qiao-yu(许乔瑜) College...; Abstract: The spangles on hot dip galvanized steel sheet were investigated......
Hot deformation mechanism and microstructure evolution of TC11 titanium alloy in b field CHEN Hui-qin(陈慧琴)1, 2, CAO Chun-xiao(曹春晓)1, GUO Ling(郭 灵)1, LIN Hai(林 海)1 1. Beijing Institute...; Abstract: Hot deformation behaviors of TC11 alloy with b-annealed lamellar structure and forged equiaxed structure were investigated in the b field in the temperature range of 1 090-1 030......
Microstructure and properties of hot extruded AZ31-0.25%Sb Mg-alloy TIAN Su-gui(田素贵)1, WANG Ling(王 岭)1, K. Y. SHON 2, K. H. KIM 2 1. School of Materials Sciences and Engineering, Shenyang... of hot extrusion treatment on the microstructure and mechanical properties of AZ31-0.25%Sb Mg alloy were investigated by means of mechanical properties measurement and microstructure observation......
Trans. Nonferrous Met. Soc. China 24(2014) 3611-3620 Forming defects in aluminum alloy hot stamping of side-door impact beam Jing ZHOU1, Bao-yu WANG1, Jian-guo LIN1,2, Lei FU1, Wen-yu MA1 1. School... is ameliorated and the springback is eliminated in the aluminum alloy hot stamping. The wrinkling severity decreases with increasing blank holder force (BHF), but the BHF greater than 15 kN causes the rupture......
