共搜索到4789条信息，每页显示10条信息，共479页。用时：0小时0分1秒158毫秒
of Nonferrous Metals Society of China, 2013, 23: 1275-1280. [17] DEVARAJU A, KUMAR A, KUMARASWAMY A, KOTIVEERACHARI B. Influence of reinforcements (SiC and Al2O3) and rotational speed on wear and mechanical......
of the fracture surfaces revealed fiber debonding and delamination although these fibers are not as strong as other reinforcing fibers like carbon, glass and SiC. The values of flexural strength.... Mechanical and electromagnetic shielding performance of carbon fiber reinforced multilayered (PyC-SiC)n matrix composites [J]. Carbon, 2017, 111: 299-308. [38] SING A P, MISHRA M, CHANDRA A, DHAWAN S K......
the last few years, efforts have been made to produce various types of Al alloys and Al-SiC composites by this technique [38-44]. In the present study, the VCS method has been applied to refining...]. Journal of Alloys and Compounds, 2008, 462(1): L28-L31. [28] MOSLEH-SHIRAZI S, AKHLAGHI F. Effect of SiC content on dry sliding wear, corrosion and corrosive wear of Al/SiC nanocomposites [J......
machine. Prior to mass loss measurement, the samples were ground with SiC emery paper up to 2000 grit and then polished with 1 μm diamond paste. The polished samples were ultrasonically cleaned in 90......
Expansion of Al2O3, BeO, MgO, B4C, SiC, and TiC Above 1000 °C [J]. Journal of the American Ceramic Society, 2006, 42: 300-305. [33] FIQUET G, RICHET P, MONTAGNAC G. High-temperature thermal expansion...- glutamic acid coating on AZ31 magnesium alloys [J]. Transactions of Nonferrous Metals Society of China, 2017, 27: 1081-1086. [46] WANG S Y, SI N S, XIA Y P, LIU L. Influence of nano-SiC on microstructure......
using electron probe microscope analysis. The specimens used for metallographic observation were ground with SiC abrasive papers and polished with diamond grinding paste. A solution containing 1 mL......
polished with SiC sand papers (1000 and 2000 grits). Next, the sample was degreased with ethanol and its cross-sectional SEM image was taken at 450× magnification without any gold plating. The surface......
the SiC abrasive paper of varying granularities and polishing with 0.05 μm Al2O3 paste. In order to reveal the microstructure, all the samples were etched with Marble’s reagent consisting of CuSO4, HCl......
axes parallel to the compression axis direction by wire cutting. The sections were ground by abrasive papers of SiC, and were electro-polished at 25 V for 20 s in an electrolyte consisting of 30 mL C2H6O......
, Struers) and then spray painted with white color. Subsequently, the anodized alloys were hot mounted, ground with SiC sand paper (grid P320-P1200), and polished with suspended alumina powders (5......
