共搜索到4663条信息，每页显示10条信息，共467页。用时：0小时0分0秒752毫秒
are higher than those in the Zr layer during the hot-rolling bonding process. Based on the EDS results (Fig. 2), the interface layers are relatively thin (~10 μm). However... and heat treatment ability of three-layer 6009/7050/6009 Al alloy clad slab prepared by direct-chill casting [J]. Transactions of Nonferrous Metals Society of China, 2018, 28: 9-19. [23] WANG Y F......
. The sintering was performed under vacuum with a constant compression pressure of 40 MPa. Thin graphite foils were placed between the powders and the graphite die to ensure easy removal of the sintered... Teneo low-vacuum scanning electron microscope (LVSEM) and an FEI Talos F200X STEM equipped with a Super-X silicon drift detector (SDD) energy-dispersive X-ray spectrometer (EDXS) system. Thin-foil TEM......
[33,34]. Especially, the high cooling after laser remelting led to preferential growth of grains. In fast solidified casting samples, the same effect is also seen as the formation of dendrite......
sheets with good mechanical properties fabricated by a combination of strip casting and high-ratio differential speed rolling methods[J]. Metals and Materials International, 2015, 21(2): 374-381. [67......
particles into desired shapes. Some of the most common forming methods for ceramics include extrusion, slip casting, pressing and injection molding. After these processes, ceramics undergo heat treatment... are that it provides high speed and precise cut when cutting thin material; laser yields no burr and a little HAZ. LAM has demonstrated its ability to reduce cutting force and lower dynamic forces, less sharp......
Fei, WANG Hui-gai. High temperature oxidation behavior of Ti811 alloy[J]. Casting Technology, 2011, 32(4): 507-510. [19] HE D, ZHU J C, ZAEFFERER S, RAABE D,LIU Y,LAI Z L,YANG X W. Influences......
of the aluminium flow in the bearing area for extrusion of thin-walled sections[J]. Journal of Materials Processing Technology, 2001, 114(2): 174-183. [11] 邓小民, 孙中建, 李胜祗, 方木云, 曹 杰. 铝合金挤压时的摩擦与摩擦因数[J]. 中国有色金属学报... international symposium on materials science. Roskilde: Ris National Laboratory, 1994: 615-620. [14] ABTAHI S. Friction and interface reactions on the die land in thin-walled extrusion[R]. Trondheim......
]. During the casting of the AZ91 magnesium alloys, a high amount of β phases form at grain boundaries. This hard particle has an opposing effect on the mechanical characteristic of the alloy and can act......
压电陶瓷的流延法制备及其性能[J]. 中国有色金属学报, 2020, 30(2): 326-332. ZHANG Shao-feng, YUAN Xi, YAN Ming-yang, et al. Preparation and properties of lead zirconate titanate piezoelectric ceramics via tape casting[J... effect on dielectric properties of polypropylene thin films and applications in electric energy storage[J]. Applied Physics Letters, 2011, 98(6): 062901. [95] ZHANG G, LI H X, ANTENSTEINER M, et al......
[33,41,58,61,65,79,90]. Continuous thin layered IMCs are usually found at the interface of Al and Cu (0.5-4 mm) (Fig. 6(d)), resulting in a sound and defect-free joining of Al-Cu [55,57,65,91], but still the Al-Cu......
