共搜索到2503条信息，每页显示10条信息，共251页。用时：0小时0分0秒656毫秒
Parameters of static response of carbon fiber reinforced polymer (CFRP) suspension cablesWANG Li-bin(王立彬)1, WU Yong(吴勇)1, Mohammad Noori2, 3(1. School of Civil Engineering, Nanjing Forestry..., Southeast University, Nanjing 210037, China)Abstract:The feasibility of longer spans relies on the successful implementation of new high-strength light weight materials such as carbon fiber reinforced......
STUDY ON THE CONDUCTING FIBER REINFORCED PLASTIC杨小利摘 要:<正>The conductive fiber reinforeed plasticwas prepared by dispersing electrical conducting fillerpartieles such as aluminium powder.graphite and carbon black to glass fiber reinforced resin.The effects that eachor double kinds of fillers.alsa the conductive fiber clothhad done on the electrial......
J. Cent. South Univ. (2019) 26: 2688-2703 DOI: https://doi.org/10.1007/s11771-019-4206-4 Characterization of carbon fibers recovered through mechanochemical-enhanced recycling of waste carbon fiber... the mechanochemical-enhanced recycling of carbon fiber reinforced fibers. The objectives of the study were to investigate the effect of our modified recycling method on the interfacial properties of recovered fibers......
J. Cent. South Univ. (2016) 23: 2165-2172 DOI: 10.1007/s11771-016-3273-z Surface adhesive properties of continuous PBO fiber after air-plasma-grafting-epoxy treatment JIA Cai-xia(贾彩霞)1, WANG Qian(王乾... Abstract: It was found that air dielectric barrier discharge (DBD) plasma contributed to the grafting of epoxy resin onto continuous PBO fiber surface. This air-plasma-grafting-epoxy method yielded......
Assessment of Fiber Distribution in Steel Fiber Mortar Using Image Analysis刘建忠1,2,孙伟11. Jiangsu Key Laboratory of Civil Engineering Materials, Southeast University2. State Key Laboratory of High Performance Civil Engineering Materials, Jiangsu Research Institute of Building Science摘 要:A new test method was introduced to measure fiber distribution......
J. Cent. South Univ. Technol. (2009) 16: 0835-0840 DOI: 10.1007/s11771-009-0138-8 Square concrete columns strengthened with carbon fiber reinforced plastics sheets at low temperatures MA Qin...; Abstract: Twenty-one square concrete columns were constructed and tested. The testing results indicate that bonded carbon fiber reinforced plastics (CFRP) sheets can be used to increase......
......
Improved properties of carbon fiber paper as electrode for fuel cell by coating pyrocarbon via CVD method XIE Zhi-yong(谢志勇), JIN Gu-yin(金谷英), ZHANG Min(张 敏) , SU Zhe-an(苏哲安), ZHANG Ming-yu(张明瑜... by using PAN-based carbon fiber felt as the precursor followed by impregnation with resin, molding and heat-treatment. SEM characterization indicates that pyrocarbon is uniformly deposited on the surface......
double linear strain distribution assumption of RC beam strengthened with external-bonded or near-surface mounted fiber reinforced plasticRen Zhen-hua (任振华) 1, Liu Han-long (刘汉龙) 1, Zhou feng-jun (周丰... of the Headquarters of the General Staff, Beijing 100850, China)Abstract:Rehabilitation of existing structures with fiber reinforced plastic (FRP) has been growing in popularity because they offer superior......
Fusion Splicing Experiments of 1060-XP Silica Fiber with Phosphate Glass Fiber杨昌盛,杨中民摘 要:<正>An asymmetric heating method for fusion splicing of 1060-XP silica fiber (1060F) and phosphate glass fiber (PGF) using an electric arc splicer has been proposed.Double joints with the lowest splice loss of 0.6 dB and good bending-resist strength between......
