共搜索到20469条信息，每页显示10条信息，共2047页。用时：0小时0分0秒605毫秒
/eutectic liquid phase zone and Cu/eutectic liquid phase zone). This is concerned with that the diffusion coefficient of elements in liquid is bigger than that of elements in solid. Fig.2 SEM...℃, respectively. The configurations of liquid phase zones are similar to those shown in Fig.2, that is, the interface shapes between the underside liquid zone and both the Ti and Cu base metals......
J. Cent. South Univ. (2016) 23: 27-38 DOI: 10.1007/s11771-016-3045-9 Delamination analysis of woven fabrication laminates using cohesive zone model Mohsen Moslemi, Mohammadreza Khoshravan azar... the single lap joint (SLJ) and end notch flexure (ENF) test, respectively. In order to verify their adequacy, a cohesive zone model simulation based on interface finite elements was performed. A closed form......
Microstructure and Mechanical Properties of Intercritical Heat-affected Zone of X80 Pipeline Steel in Simulated In-Service WeldingXin-Jie Di1,2,Lin Cai1,2,Xi-Xue Xing1,2,Cui-Xin Chen3,Zhen-Kui Xue41.... China Petrolum Pipeline Bureau摘 要:The intercritical heat-affected zone(ICHAZ) of X80 pipeline steel was simulated by using the Gleeble-3500thermal/mechanical......
......
......
element Ni into the alloy, the austenite phase is stable at room temperatures [4]. It is important to note that sensitization of STS304 in heat affected zone in brazing or welding should be avoided...Trans. Nonferrous Met. Soc. China 22(2012) s639-s644 Microstructures of brazing zone between titanium alloy and stainless steel using various filler metals Taeshin CHUNG1, Jungsoo KIM2, Jeongseok......
Determination of Effective Segregation Coefficient of Oxygen in Terbium During Floating Zone Refining 刘永林1,李国栋1 (1.Department of Physics, Inner Mongolia University,) Abstract:The effective segregation coefficient Ke of oxygen in terbium metal was deduced from a comparison of the theoretical curves with the concentration distributions found experimentally after a floating zone refining......
......
......
and fracture process in the fracture process zone of material when the materials are exposed to quasi-static uniaxial tensile traction. The influence of the mesoscopic damage mechanism on the macroscopic mechanical properties of quasi-brittle materials is summarized into two aspects, rupture damage and yield damage. The whole damage course is divided into the statistical even damage phase......
