共搜索到20478条信息，每页显示10条信息，共2048页。用时：0小时0分0秒321毫秒
The Progress on Laser Surface Modification Techniques of Titanium Alloy Al Ding-fei1,LIANG Cheng2,XIA Chun-huai2,SONG Yan2,PAN Lin2,TAO Xi-qi2 (1.School of Physical Science and Technology Wuhan University, Wuhan 430070,P. R China;2.Wuhan Research Institute of Materials Protection, Wuhan ,430030, P. R China) 摘要:Titanium alloy is widely used in aviation, national defence, automobile, medicine......
; 文献标志码:A 文章编号:1672-7207(2020)02-0349-10 Chatter and cutting forces analysis in machining of titanium alloy TB6 with vibration-free milling cutters LIU Jianyong, QIAO Lihong, CHEN Wuyi... and variable pitch milling cutters) in cutting titanium alloy TB6, titanium alloy TB6 was machined with variable helix, variable pitch and standard milling cutters. The chatter and cutting force......
......
Deformation behavior of TC1 titanium alloy sheet under double-sided pressure WANG Zhong-jin(王忠金), SONG Hui(宋 辉),WANG Zhe(王 哲) School of Materials Science and Engineering, Harbin Institute... bulge(VPB) tests of an annealed TC1 titanium alloy sheet were carried out under two different conditions: double-sided pressure bulging and conventional single-sided pressure bulging. The automated......
of Nbss/MC. Carbides in the Nb-Ti-C alloys change from Nb2C to (Nb, Ti)C with the increase of titanium content. Microstructures in the as-cast state include primary plate-like Nb2C, eutectic... micrographs of each alloy in the as-cast state are shown in Fig.2. The compositions measured by EDS of Nbss and carbides of each alloy are shown in Table 2. The molar ratio of C/M (Nb, Ti), calculated......
)Abstract:A new cup-drawing process of BT20 titanium alloy was studied. Tensile tests were carried out at room temperature, and then cup-drawing experiments were carried out with conical female die at high temperatures. The results show that the plasticity of BT20 titanium alloy is bad, σs/σb is big, n is small, so it is not suitable for BT20 titanium alloy which draws at room temperature, even......
Modeling corrosion behavior of gas tungsten arc welded titanium alloy M. Balasubramanian1, V. Jayabalan2, V. Balasubramanian3 1. Department of Mechanical Engineering, Maamallan Institute... alloy in marine environment were explained. Besides the rapid advance of titanium metallurgy, this is also due to the successful solution of problems associated with the development of titanium alloy......
Influence of homogenizing on mechanical properties of as-cast AZ31 magnesium alloy ZHANG Bao-hong(张宝红)1, ZHANG Zhi-min(张治民)2 1. School of Materials Science and Engineering, North... September 2009; accepted 30 January 2010 Abstract: Forward extrusion experiments of as-cast AZ31 magnesium alloy were conducted at different temperatures and different extrusion ratios using the as-cast......
......
Double Glow Plasma Surface Alloyed Burn-resistant Titanium Alloy ZHANG Gao-hui1,ZHANG Ping-ze1,HE Zhi-yong1,XU Zhong1 (1.Taiyuan University of Technology, Taiyuan, Shanxi, 030024, P. R. China) 摘要:Conventional titanium alloy may be ignited and burnt under high temperature, high pressure and high gas flow velocity condition. In order to avoid this problem, we have developed a new kind of burn......
