共搜索到21594条信息，每页显示10条信息，共2160页。用时：0小时0分0秒704毫秒
of numerical and experimental results for force-displacement curve of punch shows that numerical results have a good agreement with experiment. Key words: aluminum alloy 6061; forming limit diagram (FLD... of aluminum alloy 6061. These methods contained: forming limit diagram (FLD) criterion, ductile fracture criterion (DFC) and forming limit stress diagram (FLSD). Experimental tests of FLD are done based......
Brazing 6061 aluminum alloy with Al-Si-Zn filler metals containing SrWei Dai1,Song-bai Xue1,Feng Ji1,Jiang Lou2,Bo Sun2,Shui-qing Wang21. School of Materials Science and Technology, Nanjing... 6061 aluminum alloy. Air cooling and water cooling were applied after brazing. Si phase morphologies in the brazing alloy and the brazed joints were investigated. It was found that zinc in the Al-Si......
化学成分 Table 1 Chemical composition of 6061 aluminum alloy (mass fraction, %) 热处理选用的是SX2-10-12N箱式电阻炉和DHG-9145A鼓风干燥箱,热处理工艺路线为:固溶处理(560 ℃, 50 min)→水淬→停放→人工时效(180 ℃, 8 h),如图1所示.6061铝合金停放时间分别为0 h,2 h,4 h,6 h,12 h,24 h,3 d,7 d,15 d,30 d,60 d. 图1 停放效应实验流程图 Fig. 1 Heat treatment flow of 6061 aluminum alloy with parking effect 热处理后的材料沿垂直轧制方向取样,在磨抛机上依次用600#,800#,1000#水磨砂纸研磨后,使用抛光布配合水与研磨膏进......
, the constitutive equation of semi-solid 6061 aluminum alloy was established through multiple regressions. The relationship between apparent viscosity and the shear rate was investigated based... of the filling speed on the semi-solid die-casting process of 6061 aluminum alloy. The results show that, the parameters determination of Bingham model, such as apparent viscosity, is adjusted empirically......
Fractal analysis of fracture surfaces in aluminum borate whisker-reinforced aluminum alloy 6061 composite WANG Liang, WANG Li-dong, FEI Wei-dong School of Material Science and Engineering, Harbin... borate whisker-reinforced aluminum alloy 6061 composite was investigated. The composite was fabricated by squeeze-casting technique. The fracture surfaces created in tensile test were measured......
Mechanical properties and fracture behaviors on 6061 aluminum alloy under shear stress stateZHU Hao and QI Fangjuan College of Materials Science and Engineering, Shijiazhuang Tiedao University, Shijiazhuang 050043, China摘 要:The mechanical properties and fracture behaviors of 6061 aluminum alloy were investigated by the tensile shear tests and in-situ......
The Technological Improvements of Aluminum Alloy Coloring by Electrolysis LI Nai-jun1 (1.Teachers College, Shenyang University, Shenyang 110015, P. R. China) 摘要:The technological process of coloring golden-tawny on aluminum alloy by electrolysis was improved in this paper. The optimum composition of electrolyte was found, the conditions of deposition and anodic oxidation by electrolysis were......
fracture occurs in the heat affected zone of 6061 aluminum alloy. With the increase of heat input, the fracture angle gradually decreases from 41° to 3°, and the fracture mechanism changes from shear fracture to normal fracture. The distribution of nanoindentation hardness of the FSW joints indicates that the heat affected zone of 6061 aluminum alloy is the weakest area, and the fracture angle......
Compressive formability of 7075 aluminum alloy rings under hydrostatic pressure LIU Gang(刘 钢), WANG Li-liang(王礼良), YUAN Shi-jian(苑世剑), WANG Zhong-ren(王仲仁) School of Materials Science... of the ring, numerical simulation and experimental research were carried out. The effect of hydrostatic pressure on the deformation of aluminum alloy 7075 ring was obtained by numerical simulation......
Received 1 January 2019; accepted 15 August 2019 Abstract: 6061 aluminum alloy T-joints were welded by double-pulsed MIG welding process. Then, the post-weld heat treatment was performed on the welded... responsible for the peak value of the micro-hardness in the welded joints. Key words: 6061 aluminum alloy; double-pulsed MIG welding; post-weld heat treatment; microstructure evolution; mechanical property 1......
