共搜索到7515条信息,每页显示10条信息,共752页。用时:0小时0分0秒265毫秒
......
of Si content on (1-x)Ti3SiC2+xSiC composites prepared by spark plasma sintering NGAI Tung-wai, TAN Wen-chang, ZHENG Jun-jun, LUO Hui-guo, LI Yuan-yuan (National Engineering Research Center of Near...=0.1-0.8) by using spark plasma sintering. X-ray diffractometer was employed to analyze the phase constituents. The results show that, after sintering at 1 300 ℃ for 15 min, pure......
Spark Plasma Sintering of Undoped SnO2 Ceramics李其仲,张东明State Key Laboratory of Advanced Technology for Materials Synthesis and Processing,Wuhan University of Technology摘 要:Various parameters in spark plasma sintering(SPS),such as sintering temperature,holding time,heating rate,and pressure,were adopted to investigate their effects on the densification......
......
......
Trans. Nonferrous Met. Soc. China 22(2012) 768-772 Microstructure and mechanical properties of Ti-43Al-9V alloy fabricated by spark plasma sintering XU Li-juan1,2, XIAO Shu-long1,2, CHEN Yu-yong1,2... alloy; mechanical alloying; spark plasma sintering; microstructure; mechanical properties 1 Introduction Recently, TiAl-based alloys have been developed as candidate materials in aerospace structural......
Trans. Nonferrous Met. Soc. China 28(2018) 957-965 Microstructure, sintering behavior and mechanical properties of SiC/MoSi2 composites by spark plasma sintering Xin-xin HAN, Ya-lei WANG, Xiang XIONG... composites were synthesized at different temperatures by spark plasma sintering using Mo, Si and SiC powders as raw materials. The phase composition, microstructure and mechanical properties......
Trans. Nonferrous Met. Soc. China 22(2012) 1086-1091 Microstructure and mechanical properties of TiAl-based alloy prepared by double mechanical milling and spark plasma sintering XIAO Shu-long1,2... is intergranular rupture. Key words: TiAl-based alloys; mechanical alloying; spark plasma sintering; microstructure; mechanical properties 1 Introduction TiAl-based alloys have been considered attractive......
Spark plasma and microwave sintering of Al6061 and Al2124 alloysNouari Saheb1摘 要:Despite the importance of aluminum alloys as candidate materials... to process Al2124 and Al6061 alloys by spark plasma and microwave sintering techniques,and the microstructures and properties were compared.The alloys were sintered for 20 min at 400,450,and 500oC.It is found......
Spark plasma sintering on mechanically activated W-Cu powdersJIA Chengchang, LI Zhigang, HE Yuntao, and QU Xuanhui School of Materials Science and Engineering, University of Science and Technology Beijing, Beijing 100083, China摘 要:<正> Mechanically activated W-Cu powders were sintered by a spark plasma sintering system (SPS) in order to develop......