共搜索到12718条信息，每页显示10条信息，共1272页。用时：0小时0分0秒660毫秒
......
......
and grinding was designed using the further development of CATIA. And a machining simulation on face-gear shaping and tooth surface grinding with the use of CATIA was conducted. A tooth surface can... test on its meshing performance was conducted. Through analyzing transmission errors, it is found that the meshing performance of the ground face-gear is superior to that manufactured by gear shaper......
Tool life modeling for evaluating the effects of cutting speed and reinforcements on the machining of particle reinforced metal matrix compositesMetin KkVocational College Education,Kahramanmaras Sütü Imam University摘 要:The wear of cutting tools in the machining of 2024Al alloy composites reinforced with Al2O3 particles using varying sizes and volume......
outcome effects were not linearly related, it was decided to use five-level test for each factor. The machining parameters used and their levels are presented in Table 1. The ECM experiments were... second order rotatable design Table 3 Test results of ANOVA 4 Optimization To optimize the cutting parameters in the machining of GFRP composites, a non-dominated sorting genetic algorithm......
Micro electrical discharge machining of small hole in TC4 alloy LI Mao-sheng(李茂盛)1, 2, CHI Guan-xin(迟关心)2, WANG Zhen-long(王振龙)1, 2, WANG Yu-kui(王玉魁)2, DAI Li(戴 立)1, 2 1. Key Laboratory of Micro...; Abstract: Aiming at machining deeply small holes in TC4 alloy, a series of experiments were carried out on a self-developed multi-axis micro electrical......
Trans. Nonferrous Met. Soc. China 24(2014) 373-379 Experimental investigation and multi-objective optimization of wire electrical discharge machining (WEDM) of 5083 aluminum alloy G. SELVAKUMAR1, G... Abstract: The experimental analysis presented aims at the selection of the most optimal machining parameter combination for wire electrical discharge machining (WEDM) of 5083 aluminum alloy. Based......
J. Cent. South Univ. Technol. (2010) 17: 1351-1356 DOI: 10.1007/s11771-010-0641-y Engineering behaviors of reinforced gabion retaining wall based on laboratory test LIN Yu-liang(林宇亮), YANG Guo... Heidelberg 2010 Abstract: In order to study the engineering behaviors of reinforced gabion retaining wall, laboratory model test was carried out. Cyclic load and unload of five levels (0-50, 0-100......
Trans. Nonferrous Met. Soc. China 22(2012) s775-s780 Machining performance on hybrid process of abrasive jet machining and electrical discharge machining Yan-cherng LIN 1, Yuan-feng CHEN 1, A-cheng... and Technology, Taoyuan County 32097 Received 21 May 2012; accepted 1 November 2012 Abstract: To develop a hybrid process of abrasive jet machining (AJM) and electrical discharge machining (EDM), the effects......
......
