共搜索到13533条信息,每页显示10条信息,共1354页。用时:0小时0分0秒835毫秒
Trans. Nonferrous Met. Soc. China 23(2013) 1905-1914 Microstructural and abrasive wear properties of SiC reinforced aluminum-based composite produced by compocasting Ali MAZAHERY, Mohsen Ostad SHABANI Karaj Branch, Islamic Azad University, Karaj, Iran Received 27 July 2012; accepted 22 January 2013 Abstract: The effect of SiC particles reinforcement with average size of 1, 5, 20 and 50 μm......
文章编号:1004-0609(2010)S1-s1055-05 SiC纤维增强Ti-Al金属间化合物基复合材料的界面反应 张 迪,孙彦波,赵业青,李焕喜,马朝利 (北京航空航天大学 材料科学与工程学院 空天材料与服役教育部重点实验室,北京100191[U1] ) 摘 要:金属Ti箔-纤维-金属Al箔经过自蔓延燃烧反应和扩散反应过程生成连续SiC纤维增强Ti-Al金属间化合物基复合材料.结果表明:该复合材料基体是层状分布的TiAl3,TiAl2,TiAl,Ti3Al,α-Ti相和少量纯Ti相,SiC/基体的界面反应和Ti/Al反应同时发生,利用背散射电子(BSE),能谱(EDS)分析界面的形貌和元素分布.SiC/基体界面处的主要反应产物是Ti, Si和 C的化合物,反应层中Al元素含量少;在富Ti的α-Ti 及Ti3Al层中的SiC与基......
J. Cent. South Univ. Technol. (2010) 17: 1-6 DOI: 10.1007/s11771-010-0001-y Improved oxidation resistance of chemical vapor reaction SiC coating modified with silica for carbon/carbon composites YANG Xin(杨鑫)1, ZOU Yan-hong(邹艳红)2, HUANG Qi-zhong(黄启忠)1, SU Zhe-an(苏哲安)1, CHANG Xin(常新)1, ZHANG Ming-yu(张明瑜)1, XIAO Yong(肖勇)1 1. State Key Laboratory of Powder Metallurgy, Central South University......
J. Cent. South Univ. (2021) 28: 1206-1218 DOI: https://doi.org/10.1007/s11771-021-4690-1 Effects of niobium addition on microstructure and properties of CPM121 powder metallurgy high-speed... of Mechanical Engineering, Xiangtan University, Xiangtan 411105, China; 2. State Key Laboratory of Powder Metallurgy, Central South University, Changsha 410083, China; 3. College of Materials Science......
) (State Key Laboratory of Powder Metallurgy (Central South University), Changsha 410083, China)Abstract:Before densification by chemical vapor infiltration, carbon or SiC nanofibers were grown... the ordered deposition of pyrocarbon and adjust the interface bonding between pyrocarbon and carbon fibers during the infiltration.Key words:carbon nanofiber; SiC nanofiber; pyrocarbon; interface......
of the substrate, problems seen in conventional techniques based on liquid phase processing at high temperatures can be avoided. Therefore, in this work, the effect of SiC particles on the microstructure, powder...Trans. Nonferrous Met. Soc. China 22(2012) s614-s618 Effect of SiC particles on microstructure and mechanical property of friction stir processed AA6061-T4 Don-Hyun CHOI1, Yong-Il KIM2, DAE-Up KIM3......
composite[J]. Materials Science and Engineering A, 2000, 286(2): 282-288. [12] Elbir S, Yilmaz A, Tolosoy A K, et al. SiC-particulate aluminum composite foams produced by powder compacts: Foaming...SiC颗粒粒径和相对密度对泡沫SiCp/ZL104复合材料压缩性能的影响 罗彦茹1,于思荣2,朱先勇1,刘家安3 (1. 吉林大学 机械科学与工程学院,吉林 长春,130022; 2. 中国石油大学 机电工程学院,山东 青岛,266555; 3. 吉林大学 材料科学与工程学,吉林 长春,130022) 摘要:采用CaCO3作为发泡剂用熔体发泡法制备泡沫SiCp/ZL104复......
of A357-SiC nanocomposites. In the first level, a blend of SiC nanoparticles (average size of 50 nm) and pure aluminum powder (average size of 50 μm) were pressed into a disk (diameter of 10 mm) under 15 MPa... random experiments obtained by DX-7 software were performed. By this method, A357-SiC nanocomposites with 0.5, 1.0 and 1.5 wt.% SiC were fabricated at three different frequencies (10, 35 and 60 Hz......
composite powder[7-8]. In recent years, some works have been focused on the use of the carbothermal reduction method to synthesize composites such as Al2O3-SiC[9], mullite-SiC[10], mullite-ZrO2-SiC[10... and discussion 3.1. Effect of heating temperature on synthesis of ZrO2-SiC composite powder As shown in Fig.1 the synthesized ZrO2-SiC composite powder includes ZrO2, SiC and ZrSiO4 phases when the samples......
. The results show that, the powder obtained consists of spherical particles of 300-400 nm in diameter, which are composed of SiC and Al2O3 microcrystal with the grain size of approximately 45 nm. The results...″ is the imaginary part of complex permittivity. Key words: sol-gel method; carbothermal reduction; SiC-Al2O3; composite powder; microwave permittivity 1 Introduction Silicon carbide (SiC......