共搜索到2914条信息,每页显示10条信息,共292页。用时:0小时0分0秒498毫秒
yttrium(Y) and hot extrusion on the microstructure and mechanical properties of A356 alloy were investigated by mechanical properties testing and microstructure observation. The results indicate..., respectively, than that of the alloy without Y addition. Under extrusion stress, the shape of the eutectic Si phase is changed from long rod-like to near grain-like after solution treatment.The size......
yttrium(Y) and hot extrusion on the microstructure and mechanical properties of A356 alloy were investigated by mechanical properties testing and microstructure observation. The results indicate..., respectively, than that of the alloy without Y addition. Under extrusion stress, the shape of the eutectic Si phase is changed from long rod-like to near grain-like after solution treatment.The size......
Trans. Nonferrous Met. Soc. China 25(2015) 1763-1769 Microstructure and properties of Al-0.70Fe-0.24Cu alloy conductor prepared by horizontal continuous casting and subsequent continuous extrusion... alloy conductor was proposed, which includes horizontal continuous casting and subsequent continuous extrusion forming (Conform). The mechanical properties, electrical conductivity and the compressed......
Microstructure and Mechanical Properties of Pure Magnesium Subjected to Hot Extrusion雷维维1,2,ZHU Derong3,王红霞1,2,梁伟1,21. School of Materials Science and Engineering, Taiyuan University of Technology2... of the sample before and after extrusion were investigated. The results show that the as-extruded microstructure is obviously refined with a large number of subgrains rather than equiaxed grains. A great......
. Deformation behavior and formability of ABOw reinforced aluminum (ABOw/Al) composites with and without Bi2O3 coating were investigated by the extrusion deformation at 400 ℃. The results show that the steady-state extrusion load and the probability of whisker fracture of extruded ABOw/Al composite with Bi2O3 coating are lower than those of extruded ABOw/Al composite, and its surface quality......
Recycling of AZ91 Mg alloy through consolidation of machined chips by extrusion and ECAP YING Tao(应 韬), ZHENG Ming-yi(郑明毅), HU Xiao-shi(胡小石), WU Kun(吴 昆) School of Materials Science... pressing (ECAP) exhibited a superior strength. The mechanical properties of AZ91 Mg alloy recycled from machined chips by extrusion at 623 K and ECAP at 573 K and 623 K were compared with those......
, Changsha 410082, China) Abstract: The Al-10Mn alloys were prepared by the solid-liquid mixed casting process and subsequent hot extrusion process, and the microstructures and mechanical properties... and near spherical shape, and its tensile strength is improved to 130MPa. The tensile strength of the billets after subsequent hot extrusion process is greatly improved to 181MPa. When the heating......
10 mm/s,模锥半角30°,挤压比3. 关键词:β-γ高Nb-TiAl合金;高温挤压;Deform-3D模拟; 挤压速度;模锥半角;挤压比 中图分类号:TF777.1 文献标志码:A Hot extrusion simulation of β-γ TiAl alloy containing high Nb ZHENG Jun-zi... extrusion process of Ti-45Al-8.5Nb-0.2W-0.2B-0.02Y (mole fraction, %) alloy was investigated by a Deform-3D software. The influences of extrusion speed, die half-angle, extrusion ratio and die fillet......
到固溶原子,位错密度及Al3Fe相形貌的综合影响. 关键词:AA8030铝合金;挤压比;电导率;再结晶 中图分类号:TG376.2 文献标志码:A Effect of extrusion ratio..., China; 3. Gold Cup Electric Apparatus Co.Ltd., Changsha 410083, China) Abstract: AA8030 aluminum alloy (Al-0.7Fe-0.2Cu) rod was prepared by hot extrusion, and the influences of extrusion ratio......
Trans. Nonferrous Met. Soc. China 23(2013) 3200-3205 Microstructure and mechanical properties of AM60B magnesium alloy prepared by cyclic extrusion compression Li-ping Wang, Tian CHEN, Wen-yong JIANG... Abstract: The cyclic extrusion compression (CEC) process was introduced into the AM60B magnesium alloy. The use of the CEC process was favorable for producing finer microstructures. The results show......