共搜索到4003条信息，每页显示10条信息，共401页。用时：0小时0分0秒493毫秒
Erosion-corrosion behavior of Pd-Co and Pd-Cu films on 316L stainless steel in simulated PTA slurry environment Si-rui LI, Yu ZUO Beijing Key Laboratory of Electrochemical Process and Technology... fraction) and Pd-Cu (5% Cu, mole fraction) film were electrodeposited on 316L stainless steel, and the erosion-corrosion resistance of the Pd-Co and Pd-Cu plated samples in a simulated boiling pure......
......
and 316L stainless steel in sulfide-containing Bayer liquor were studied by using high-temperature coupon exposure tests, means of anodic polarization curves and cyclic voltammetry. The results indicate that the corrosion rates of the four steels from small to large order are 316L stainless steel, 304L stainless steel, A3 carbon steel and 16Mn low alloy steel. 16Mn low alloy steel and A3 carbon steel......
Gelcasting of 316L stainless steelYan Li, Zhimeng Guo, and Junjie Hao Materials Science and Engineering School, University of Science and Technology Beijing, Beijing 100083, China摘 要:A novel near-net process, gelcasting, was successfully used to prepare larger size 316L stainless steel parts with complex shape. In this study, the effects of process......
13 October 2014; accepted 10 March 2015 Abstract: In order to improve corrosion resistance of stainless steel 316L in warm acidic solution, Ni-Cu-P coatings with high copper and phosphorus contents were deposited onto stainless steel 316L substrates via electroless plating. The structure of the film and its resistance to corrosion in a warm acidic environment were investigated using scanning......
J. Cent. South Univ. (2018) 25: 2578-2588 DOI: https://doi.org/10.1007/s11771-018-3937-y Development and characterization of hot dip aluminide coated stainless steel 316L Sehrish MUKHTAR1, Waqas... Germany, part of Springer Nature 2018 Abstract: Stainless steel (SS) grade 316L is used for orthopedic implants due to its biocompatibility; yet the effort should be done to minimize the carcinogenic......
of Mining and Technology,Xuzhou 22100, China; 3. Institute of Techniques, Ningbo Institute of Engineering, Ningbo 315016, China) Abstract: The feasibility of joining MoSi2 to 316L stainless steel with spark plasma sintering(SPS) techniques was investigated with MoSi2 /316L stainless steel graded material as the interlayer system. The residual stresses in the joint were analyzed by finite element......
Trans. Nonferrous Met. Soc. China 22(2012) 97-103 Composition and corrosion resistance of palladium film on 316L stainless steel by brush plating TANG Jun-lei, ZUO Yu, TANG Yu-ming, XIONG Jin-ping... adhesive strength were deposited on 316L stainless steel by brush plating. Scanning electronic microscopy, energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy (XPS), mass loss tests......
......
J4不锈钢及化学镀Ni-P和Ni-Cu-P镀层在液-固两相流中的冲刷腐蚀行为方信贤1,白允强1,王章忠1(1.江苏省南京市南京工程学院材料工程学院)摘 要:用质量损失法系统研究了不同温度(25和50℃)和不同冲刷速率(0.63-1.88 m/s)下,J4不锈钢,Ni-P和Ni-Cu-P合金镀层,及对比材料316L不锈钢在液-固两相流(20%H2SO4+20 g/L Al2O3)中的冲刷腐蚀行为,结果表明:不锈钢和镀层的抗冲刷腐蚀性能由高到低依次为镀态Ni-Cu-P,镀态Ni-P,热处理态Ni-Cu P,316 L,J4,提高两相流介质温度均使它们的冲刷腐蚀速率增大.316L不锈钢在25℃液-固两相流介质中的冲刷腐蚀速率分别为镀态Ni-Cu P,镀态Ni-P和热处理态Ni-Cu-P镀层的8.5倍,8倍和......
