共搜索到18629条信息，每页显示10条信息，共1863页。用时：0小时0分0秒935毫秒
, 27(2): 282-288. SHEN Ding, YANG Shao-bin, LI Si-nan, SUN Wen, TANG Shu-wei. Calculation and prediction of lithium insertion properties and elastic properties for Sn-Li alloy based on first-principle......
presented in Ref. [52] consists of a wrapped screen mesh, made of single-plaited stainless steel. Stainless steel is a steel alloy composed of iron and different proportions of chromium, which is responsible......
to the excessive consumption of the outer Cr-Al-Si alloy coating and there are also some defects appearing in the SiO2 glass layer. SHI et al [67] prepared a La-Mo-Si-O-C coating on the surface of porous SiC pre... and slurry method to prepare a SiC/Cr-Al-Si coating on the surface of C/C composites. The study shows that the oxygen resistance depends on the thin thickness and porous structure of the mono-layer SiC......
testing procedure. In addition, it is environmentally significant to carry out this research as the silica fume is the waste from the metal and alloy production industry, while nano- silica can......
100%的Cu和95%的Li被浸出,Mn的浸出率也超过了70%,而Al,Ni以及Co的浸出率只有40%左右.经分析发现,黑曲霉代谢活动中产生的有机酸主要包括柠檬酸,苹果酸,草酸和葡萄糖酸等,其中柠檬酸对金属的浸出率贡献最大. 尽管通过一些离子的催化作用或者改变菌种体系可以使一些金属的浸出率显著提高,但生物浸出方法仍然难以在工业中大规模应用,其原因是:一方面,菌种难培养不易存活,对生长环境要求高；另...现Co,Ni以及Cu的高效浸出,而Mn和Al基本不被浸出. 2.5 辅助强化浸出 一般地,酸浸出和氨浸出都需要较长的浸出时间和较高的浸出温度.为了提高金属的浸出效率,可采用一些辅助方法来增强浸出.常见的辅助浸出手段有超声辅助以及机械化学辅助[71-72]. JIANG等[71]以H2SO4作为浸出剂,H2O2作为还原剂从废旧LiCoO2中浸出Li和Co.在浸出温度为30 ℃和浸出时间为30 min......
算 常用的载氧体为Fe,Co,Ni,Cu和Mn的氧化物,在600~1 200 ℃下CH4与常见氧化物的反应热力学数据如图3所示,lg K越大说明金属氧化物与CH4反应越容易,MnO2/Mn2O3,Mn2O3/Mn3O4,Co3O4/CoO,CuO/Cu2O比Fe2O3/Fe3O4和NiO/Ni更容易氧化CH4,并且Fe2O3/Fe3O4,Mn2O3/Mn3O4,CuO/Cu2O和NiO/Ni都可以...可以提高载氧体的反应活性[68].IMTIAZ等[69-70]使用Cu改性的铁基载氧体,Cu0可以促进FeO还原到Fe0,并且Cu覆盖在表面有利于提高载氧体的抗积碳性能,QIN等[71]使用1%的Cu改性铁基载氧体,在700 ℃时CH4转化率是未改性载氧体的470%.稀土金属如La,Ce和Y等也被用于改性铁基载氧体,KANG等[72]发现Y改性的Fe2O3/Al2O3载氧体CH4转化率达98%的同......
alloy surface is more conducive to the proliferation of osteoblasts [22]. Table 3 Effects of sintering temperature on porosity, density, and flexural properties of 3DP HAAW composites Table 4......
Zhi-guang, et al. Reduction kinetics of Fe2O3-NiO composites for production of Fe/Ni alloy using hydrogen under non-isothermal conditions[J]. The Chinese Journal of Nonferrous Metals, 2017, 27(1... al. Experimental study on reduction of Cr-containing materials in iron bath with C and H2[J]. The Chinese Journal of Process Engineering, 2013, 13(2): 246-249. [75] LIU G, SHENG Y, AGER J W, et al......
forces from rock blocks. Cutters today can either incorporate hard, fine grained carbides into the matrix of the disc material or apply a hardened coating of alloy powder on the steel substrate......
